User: JoeNorm, Location: WA
Asked on: Wednesday, October 8, 2025 at 8:49 am EDT
Answered on: Wednesday, October 8, 2025 at 8:49 am EDT
Question: I will be roughing in a few floor receptacles in a slab soon and wondering if anyone has specific products they have used and like?I noticed these: https://www.floorboxstore.com/concrete-floor-boxes/The box is recessed beneath the floor surface so it can be used like an In-use cover. I thought that was clever.Slab will be finished floor.Thanks
You're on the right track thinking about recessed boxes, especially with a finished floor. That link to the Floor Box Store is a good starting point. Here's a breakdown of factors to consider and some product recommendations based on common needs
Key Considerations for Slab Floor Receptacles:
Concrete Pour Depth
This is critical. You need to know the minimum concrete thickness required for structural integrity. You can't just arbitrarily cut into the slab. Consult with a structural engineer if you're unsure. This depth will dictate the height of your box. You need enough room for the box, wiring, and whatever raceway or conduit you're using to feed the box.
Finished Floor Thickness
Tile, wood, epoxy, carpet – all add thickness. Account for this in the box selection, aiming for a flush or slightly recessed finish. You can always shim up, but you can't easily remove material from the concrete after the pour.
Water Resistance/Tightness
Concrete can wick moisture, and floors get cleaned. A gasketed or sealed box is important to prevent corrosion and potential electrical issues. Look for boxes specifically rated for wet/damp locations.
Durability
Floor boxes get stepped on, kicked, and sometimes rolled over with furniture. Choose a robust box made of metal (cast iron, steel, or aluminum). Plastic boxes generally aren't suitable for high-traffic areas in a concrete slab.
Ease of Installation
The box needs to be securely anchored during the pour. Think about how you'll brace it and keep it level. Some boxes have built-in leveling features.
Wire Entry
Consider the direction and type of conduit (or raceway) you'll be using to bring power to the box. Make sure the box has appropriate knockouts or provisions for conduit connections. You need to properly protect the wires entering the box.
Code Compliance
NEC (National Electrical Code) requirements are paramount. Verify that the box and receptacle meet all applicable codes for floor receptacles, especially regarding grounding, tamper-resistance (if required), and GFCI protection.
Specific Products and Recommendations
1. Recessed Boxes with In-Use Covers (Like the Floor Box Store)
Pros
Sleek appearance, protection from debris and foot traffic, can be suitable for wet locations.
Cons
Can be more expensive than basic flush-mount boxes, may require deeper concrete pour.
The Floor Box Store Option
The ones you linked look good. Pay close attention to the dimensions and material specs. Read reviews if available.
Alternatives
Arlington Industries FBC Series
These are well-regarded for concrete floors. They offer different depths and configurations. Look for their recessed models with covers. They often require a separate cover plate, but you have more choices for the cover.
2. Flush-Mount Boxes (with separate cover plates)
Pros
Generally more affordable, wider variety of sizes and configurations, easier to find.
Cons
Not as seamless of an appearance, may be more susceptible to damage if the cover plate is not flush with the floor.
Hubbell Floor Boxes
Hubbell makes high-quality floor boxes in a variety of materials and configurations. Their cast-iron boxes are particularly robust.
Carlon B618 Series
These are PVC boxes, so they are less durable than a metal box.
3. Before You Buy
Check NEC requirements for floor receptacles. These are commonly found in Article 210 and Article 406 of the NEC. Consult with your local building inspector. This is especially important if you're not a licensed electrician. They can clarify local codes and requirements. Read online reviews. See what other users have to say about the specific boxes you're considering. Don't skimp on quality. This is a permanent installation, and a cheap box can cause problems down the road.
Installation Tips
Secure the Box
Use wire to tie the box to the rebar grid or other reinforcement in the slab. Alternatively, use concrete screws or anchors. Make sure the box is very stable before the pour.
Leveling
Use a level (and shims if necessary) to ensure the box is perfectly level with the finished floor.
Conduit/Raceway
Properly connect and secure the conduit or raceway to the box. Use appropriate fittings to prevent water ingress.
Mark the Location
Take precise measurements and mark the location of the box on your plans before the pour. This will make it easier to find later.
Test the Wiring
After the pour and before the floor is finished, test the wiring to make sure everything is working correctly.
In summary: The Floor Box Store option is a good starting point. But do your homework. Precisely measure the concrete depth you'll need and the finished floor thickness before* you order. Consider wet-location ratings and the durability of the box, and always comply with the NEC. Good luck! Flag for review