Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Portable Generator with solar

User: Eddie702, Location: Western Massachusetts

Asked on: Saturday, October 11, 2025 at 7:36 pm EDT
Answered on: Saturday, October 11, 2025 at 7:37 pm EDT

Question: Probably a dumb question but not my area of expertise. Maybe I don't have any area of expertise LOL.Friend of mine was given a portable 9500 watt generator. They have a 100 amp panel with solar. Mostly gas appliances. What's the best way to y the generator in? Panel interlock?Does anything need to be done with the solar when running the Gen?

Okay, not a dumb question at all! Figuring out how to safely and effectively integrate a generator with an existing electrical system, especially one with solar, requires careful consideration. Here's a breakdown of the best way to approach this situation

The Safest and Recommended Method: Interlock Kit
What it is

An interlock kit is a mechanical device installed on your friend's main electrical panel. It ensures that
either the main breaker (power from the utility grid or solar) or the generator breaker is ON, but never both at the same time. This is absolutely crucial to prevent backfeeding power onto the grid, which is extremely dangerous for utility workers and could damage the generator and your friend's electrical system.

How it works

The interlock physically slides to block one breaker from being turned on when the other is on. A generator breaker is added to the panel (usually at the top or bottom). A power inlet box (a special receptacle designed for generator input) is installed on the outside of the house and wired directly to the generator breaker inside the panel. A heavy-duty cord then connects the generator to the inlet box.

Why it's best



Safety

Completely eliminates the risk of backfeeding the grid.

Code Compliance

Interlock kits are the method most often required by electrical codes.


Convenience

Provides a centralized and safe way to power the entire house (or specific circuits) from the generator.

Permanent Solution

Once installed, it's always ready to go.

Steps to Install with an Interlock Kit (Professionally)


Consult a Licensed Electrician

This is essential! Working with electrical panels is dangerous, and proper installation is critical for safety and code compliance. The electrician will:

Assess the Panel

Determine if the panel is compatible with an interlock kit. Some older panels or panels that are already very full might require modifications or even replacement.

Select the Correct Interlock Kit

The interlock kit must be specifically designed for the brand and model of the electrical panel.


Install the Interlock Kit, Generator Breaker, and Inlet Box

This involves working inside the panel, running wiring, and making secure connections.

Inspect and Test

The electrician will verify that the system is working correctly and safely.2.

Install a Power Inlet Box

This is a weatherproof box mounted on the outside of the house where you'll plug in the generator cord. It should be located in a convenient place near where you'll typically position the generator.3.

Connect the Generator

Use a heavy-duty, appropriately sized generator cord to connect the generator to the power inlet box.

Important Considerations for Solar Power



Disconnecting the Solar

Yes, you almost certainly need to disconnect the solar when running the generator. Here's why:

Conflict

The generator and the solar inverter(s) might try to work against each other, potentially damaging one or both. The inverter is designed to synchronize with the utility grid; when the grid is down and the generator is supplying power, the inverter might not know what to do.


Backfeeding Concerns

Even with an interlock, if the solar inverter is still producing power, it could create a situation where power is being sent back towards the generator.

How to Disconnect

Your friend's solar system should have a clearly labeled disconnect switch (usually near the inverter or the main panel).
This is what you need to turn off before starting the generator. The electrician who installed the solar system should have shown them how to do this. If they're unsure, consult a solar professional.

Automatic Transfer Switches (ATS)

Some sophisticated solar systems use an ATS to seamlessly switch between grid power, solar power, and generator power. However, these systems are complex and require professional installation and programming. If your friend's system has one, they need to understand how it's configured to work with a generator.

Generator Sizing and Load Management



9500 Watts Running, or Starting?
Generators are often rated for both "starting watts" (the surge needed to start motors) and "running watts" (the continuous power output). Your friend needs to know the running watts of the generator to determine what they can safely power. Load Calculation

Add up the wattage of the appliances and lights they want to run simultaneously during a power outage. This is crucial to avoid overloading the generator. Prioritize essential loads like refrigerators, freezers, medical equipment, and a few lights.

Starting Surge

Be aware of appliances with motors (refrigerators, freezers, air conditioners, well pumps) that require a surge of power to start. The generator needs to be able to handle these surges.


Load Shedding

Consider using a "load shedding" system (either manually or automatically) to prevent the generator from being overloaded. This involves turning off non-essential appliances when the generator is under heavy load.

Other Considerations



Carbon Monoxide Safety

Generators produce deadly carbon monoxide.
Never run a generator indoors or in an enclosed space like a garage. Place it in a well-ventilated area, away from windows and doors. Install carbon monoxide detectors in the house.

Fuel Storage

Store gasoline safely in approved containers, away from heat sources. Use a fuel stabilizer to prevent the gas from going bad during storage.

Maintenance

Follow the generator manufacturer's maintenance schedule (oil changes, spark plug replacement, etc.) to keep the generator running reliably.


Local Codes and Permits

Check with your local building department to see if any permits are required for installing a generator or an interlock kit.

In Summary:


The only safe and reliable method for your friend to connect their generator is with a professionally installed interlock kit and a power inlet box. They must consult with a licensed electrician and a solar professional to ensure the system is installed correctly and that the solar is properly disconnected when the generator is running. Don't attempt to DIY this! Electricity is dangerous.Tell your friend to prioritize safety and code compliance above all else. This will give them peace of mind and ensure that their generator provides reliable power during outages without putting themselves or others at risk. Flag for review

Previous Question Next Question