User: russellyoungblood, Location: 75755
Asked on: Monday, October 13, 2025 at 10:11 am EDT
Answered on: Monday, October 13, 2025 at 10:13 am EDT
Question: Has anyone installed Continua Sq8 lights w roll in lenses? Im having issues w them being too narrow and falling out,I just found 1 out of 9 that fit. I have 8 out of 9 installed on one floor and maybe 4 out of 12 on the other. The lenses were in the package,rolled in correctly etc. Just wondering b4 I tell them about half the lenses are defective and need new ones. I did notice one was a tiny bit wider today than the other eight lenses left. Its just irritating,I have other lights w same frame and dimensions that fit no problem. Theee are 8 ft fixtures w/o any junctions on them,you can add them together for a row of continous lighting but thats not the case here.
It sounds incredibly frustrating to have so many lenses not fit properly, especially after already installing so many fixtures. Here's a breakdown of potential causes and troubleshooting steps, plus how to approach the manufacturer
Possible Causes and Troubleshooting:
Manufacturing Tolerance Issues
This is the most likely culprit given the high number of non-fitting lenses. Even slight variations in lens width or fixture channel width can cause the problem you're experiencing.
Lens Warping
While you say they were rolled in correctly, check each lens very carefully for any signs of warping or bending, especially along the edges that slide into the fixture. Even a slight warp can make it impossible to stay in place. Look at them from different angles in good light.
Fixture Channel Issues
Although you mentioned other fixtures with the same dimensions working fine, double-check the channel width on the Continua Sq8 fixtures themselves. Use a caliper to measure the channel width at several points along each fixture. Compare these measurements to the dimensions specified in the product documentation. Even a minor variation can cause issues.
Dust or Debris
Make sure the channels in the fixtures are completely clean and free of any dust, debris, or paint residue. Even a small amount of obstruction can prevent the lenses from seating properly.
Temperature
Are the fixtures exposed to extreme temperature fluctuations? Heat can cause plastic lenses to expand or distort, making them harder to fit.
Installation Technique (Less Likely)
While it sounds like you're doing it correctly, double-check the recommended installation method from Continua. Sometimes there's a specific technique that's not immediately obvious. Some roll-in lenses need to be rolled slightly off-center to properly grip the channel.
Steps Before Contacting the Manufacturer
Document Everything
This is crucial. Take photos and videos of: The lenses that don't fit. Focus on the dimensions and any visible warping or defects. The fixture channels. Measurements you've taken with a caliper. The lenses that do fit, showing them seated properly.2.
Identify Batch Numbers
If possible, find the batch numbers or manufacturing codes on the packaging or on the fixtures themselves. This information will help the manufacturer track down the source of the problem.3.
Consolidate Your Findings
Write down a clear, concise summary of the problem, including: The number of fixtures and lenses involved. The percentage of lenses that don't fit. Your observations about the lens dimensions and fixture channels. Any troubleshooting steps you've already taken.
Contacting the Manufacturer (Continua or the Supplier)
Be Polite and Professional
Start by explaining the problem calmly and clearly. Remember, the person you're talking to is likely not responsible for the manufacturing defect.
Present Your Documentation
Provide the photos, videos, measurements, and batch numbers you've collected. This will give them a clear understanding of the issue and help them resolve it more quickly.
Clearly State Your Desired Outcome
Tell them what you want them to do. Are you requesting replacement lenses? A refund? On-site assistance? Be specific.
Ask for a Case Number or Reference Number
This will help you track the progress of your claim.
Escalate if Necessary
If you're not getting a satisfactory response from the initial contact, ask to speak to a supervisor or manager.
Example Email/Call Points
"I'm writing to you regarding a problem I'm experiencing with Continua Sq8 LED light fixtures and roll-in lenses that I recently purchased. I installed [Number] fixtures, and I'm finding that approximately [Percentage]% of the lenses are too narrow and fall out of the channels. I've carefully rolled in the lenses according to the instructions, and I've verified that the fixture channels are clean and free of debris. I've also noticed some slight variations in the width of the lenses.I've taken measurements and photos that I can provide to illustrate the problem. The batch numbers on the fixtures are [List Batch Numbers, if available]. I would like to request [Replacement lenses / A refund / On-site assistance] to resolve this issue. Could you please provide me with a case number or reference number for this claim?"
Important Considerations
Warranty
Check the warranty information for the Continua Sq8 fixtures and lenses. Make sure you're still within the warranty period.*
Supplier vs. Manufacturer: Depending on where you purchased the lights, you may need to contact the supplier first. They might handle warranty claims directly. However, don't hesitate to contact Continua directly if you're not getting anywhere with the supplier.This situation sounds like a clear case of manufacturing defects, and you have a strong case for getting the lenses replaced. Good luck! Flag for review