Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: LED Lights

User: Cheapshotsb, Location: Napa California

Asked on: Monday, October 13, 2025 at 8:11 pm EDT
Answered on: Monday, October 13, 2025 at 8:12 pm EDT

Question: I have 2 tube equivalent 4' LED lightsNondimmable 65w. The customer purchased all the equipment without consulting me. First lights are too bright.They are already installed. The electricity bill is way too much, and he's wondering if we disconnected one of the strips in the fixture, would it reduce the power consumption?Ultimately, a smaller utility bill

Okay, let's break down this situation and figure out the best course of action.

Understanding the Problem Too Bright

The 65W LED equivalent to a 4' tube is likely overkill for the space, causing discomfort.


High Electricity Bill

65W per fixture adds up, especially if the lights are on for extended periods.

Existing Installation

This adds complexity since uninstalling and replacing is more labor-intensive.


Customer Responsibility

They made the initial decision, but you're now responsible for finding a solution.

Addressing the Core Issue: Reducing Brightness and Power Consumption


Here's a breakdown of options and their feasibility

1. DO NOT DISCONNECT THE STRIP LEDS!
Why This is a Bad Idea



Safety Hazard

Opening the fixture and modifying the wiring voids any safety certifications (UL, ETL, etc.). This could create a fire or shock hazard and expose you to significant liability.

Damage to the Fixture

LED drivers are designed to work with a specific load. Removing part of the load can damage the driver, shortening the lifespan of the remaining LEDs or causing it to fail completely.


Uneven Light

Removing one strip will create uneven light distribution, likely making the problem worse.

Warranty Void

Modifying the fixture will void any warranty.

2. Replacing the fixtures
The Best Long-Term Solution

Replacing the fixtures with a lower wattage/lumen output.

Calculate Needs

Determine the appropriate light level for the space. Use a light meter or online calculators to estimate the required lumens. Consider the room's purpose, size, and surface reflectance.


Choose Suitable Replacements

Select LED fixtures with a wattage and lumen output that meet the actual needs, not just an "equivalent" to old fluorescent tubes.

Consider Color Temperature

Choose a color temperature (Kelvin) that's appropriate for the space. Warm white (2700K-3000K) is good for comfort, while cool white (4000K-5000K) is better for task lighting.


Downsides

Initial cost of new fixtures and labor for replacement.

3. Dimmers (Likely Not Feasible with Existing Fixtures)
Dimming

Reduces both light output and power consumption.


Compatibility

Most LED fixtures require a compatible LED dimmer. Since the existing lights are non-dimmable, this won't work without replacing the fixtures or the internal driver (which brings you back to option #2).

Downsides

If dimming
were possible, it would require replacing the switches with dimmers. Since the customer specifically purchased non-dimmable lights, this is likely not a good option.

4. Light Diffusers or Films (A Less Ideal, But Cheaper, Temporary Solution)
How it Works

Applying a translucent film or diffuser to the outside of the fixture to reduce the amount of light emitted.

Pros

Relatively inexpensive, easy to install, doesn't involve electrical modifications.


Cons

Reduces light output but doesn't lower power consumption. Can alter the color temperature. May not be aesthetically pleasing. Light distribution may be affected.

Important Note

Ensure the diffuser or film is heat-resistant and rated for use with LED lighting to avoid any fire hazards.

5. Using Fewer Fixtures (If Possible)
Evaluate Coverage

Can the space be adequately lit with only one fixture?

Disconnection

Simply disconnect one of the fixtures.


Downsides

May create dead spots.

Recommendation


Explain the Dangers of Modifying Fixtures

Start by clearly explaining the safety hazards and warranty implications of disconnecting LED strips within the fixtures. Emphasize that it's not a safe or recommended practice.2.

Assess the Lighting Needs

Discuss with the customer the actual purpose of the space and the desired level of illumination.3.

The Best Solution: Replacing the Fixtures

Recommend replacing the fixtures with appropriate-wattage LED fixtures. Provide options with different wattages and lumen outputs. Offer to calculate the estimated energy savings with the new fixtures.4.

If Budget is a Major Concern

Explore the diffuser/film option as a temporary solution, but clearly explain its limitations (doesn't save energy, may affect light color, may not look great).5.

Consider Occupancy Sensors

If the lights are left on unnecessarily, suggest installing occupancy sensors to automatically turn them off when the space is unoccupied. This will significantly reduce energy consumption.

Important Considerations



Liability

Document all conversations and recommendations in writing to protect yourself from liability.


Code Compliance

Ensure any changes comply with local electrical codes.*

Customer Communication:
Be honest and transparent with the customer about the situation and the potential solutions.By presenting the options clearly and emphasizing the importance of safety, you can help the customer make an informed decision and find a solution that meets their needs. Good luck! Flag for review

Previous Question Next Question