Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Metal Clad Switchgear vs Arc Flash Resistant Metal Clad Switchagear

User: FaradayFF, Location: California

Asked on: Tuesday, October 14, 2025 at 12:20 pm EDT
Answered on: Tuesday, October 14, 2025 at 12:21 pm EDT

Question: Hi AllHow much more expensive would a typical Arc Flash rated switchgear be over a standard metal clad? Would it be around 1.5 times standard metal clad?Thanks,EE

It's very difficult to give a definitive "X times the price" answer because the cost difference between standard metal-clad switchgear and arc-flash-resistant switchgear varies greatly based on several factors: Level of Arc Flash Protection

There isn't a single "arc flash rated" definition. There are degrees of protection. Are you talking about:


Arc-resistant design (IEEE C37.20.7)

This is the most common type of "arc flash rated" switchgear. It's designed to vent the arc flash out the top or back in a controlled manner, protecting personnel standing in front of the gear.

Arc flash mitigation strategies

These strategies use devices and design approaches to minimize the likelihood of an arc flash or reduce its duration and energy. Examples include:


Arc flash relays

Quickly detect and trip breakers to extinguish the arc flash.

Current limiting fuses or breakers

Reduce the available fault current.


High-resistance grounding

Lowers ground fault current.

Maintenance switches

Allow operation in a safer mode during maintenance.


Remote racking

Keeps personnel outside of the arc flash boundary.

Voltage Class

Medium voltage (e.g., 5kV, 15kV) generally has a different price structure than low voltage (e.g., 480V, 600V). Arc flash protection can be more expensive for higher voltage systems due to the increased arc flash energy.


Manufacturer

Different manufacturers have different designs and pricing strategies.

Options and Features

Adding features like remote racking, viewing windows, or special interlocks will increase the cost.


Complexity of the Switchgear

The size of the switchgear lineup, the number of breakers, and the overall complexity of the system will all affect the base cost and the cost of adding arc flash protection.

Market Conditions

Material costs, labor rates, and supply chain issues can all fluctuate and impact prices.

Rule of Thumb (Very Rough)



Arc-resistant switchgear (IEEE C37.20.7)

A very general estimate is that it could be

1.2 to 2 times
the cost of standard metal-clad switchgear. The lower end of that range would be for simpler, lower-voltage applications, while the higher end would be for more complex, higher-voltage systems with more features. Arc flash mitigation strategies

The cost of these strategies varies widely depending on the specific approaches used. Adding arc flash relays might add a relatively small percentage to the overall cost, while implementing remote racking could significantly increase the cost.

Why the Range is So Broad



Base Cost Variability

The base cost of standard metal-clad switchgear itself can vary significantly.

Customization

Arc flash protection is often a customized solution, adding to the engineering and manufacturing costs.


Perceived Value

Some manufacturers may price arc-flash-resistant gear at a premium due to the increased safety benefits.

Best Approach for Accurate Pricing


Define Your Needs

Determine the specific level of arc flash protection you require based on an arc flash hazard analysis. This analysis will tell you the incident energy levels and help you choose the appropriate mitigation strategies.2.

Contact Multiple Manufacturers

Get quotes from several reputable switchgear manufacturers. Provide them with detailed specifications, including the desired level of arc flash protection and any specific features you need.3.

Compare Quotes Carefully

Don't just look at the bottom line. Compare the features, performance, and warranty of each option.4.

Consider Lifecycle Costs:
Arc flash mitigation can sometimes reduce maintenance costs and downtime, which should be factored into the overall cost analysis.In summary, while 1.5 times the cost is possible in some scenarios, it's not a reliable average. A detailed quote from multiple manufacturers is essential to get accurate pricing for your specific application. Good luck! Flag for review

Previous Question Next Question