User: onlinemn
Asked on: Thursday, October 16, 2025 at 2:22 am EDT
Answered on: Thursday, October 16, 2025 at 4:35 am EDT
Question: Looking for Clarification using the NEC 2023 code. The AHJ said the cat6 Plenum cables (2) cables in 3/4 PVC in concrete to floor box under conference room table are now considered to be in a wet location because we are on the ground floor, and that we would need to either pipe all the way to the IT closet with EMT and install a outdoor/wet rated cable like OSP Cat6A so the plenum air space will not be an issue or install a J-Box and essentially do a splice , plenum to OSP.I know that in the 2011 code we followed this rule, in Article 800.47 Underground Communications Wires and Cables Entering Buildings. The requirements that insulated conductors and cables in wet locations be listed for wet locations 310.10(C) do not apply to communications cables. https://www.mikeholt.com/instructor2/img/product/pdf/11LE-968-sample.pdfWhere is the reference in the 2023 code that would allow the exemption for communication circuits to be installed.
You're right to question the AHJ's interpretation. The 2023 NEC, like previous editions, provides exemptions for communication cables under certain circumstances related to wet locations. Let's break down the issue and find the relevant code section.
The Core Issue
The AHJ is considering the conduit run in concrete to a floor box on the ground floor as a "wet location" because of the potential for moisture ingress. They are requiring either a complete transition to a wet-rated cable (like OSP Cat6A) or a junction box for splicing to a wet-rated cable.
Where the AHJ is Likely Coming From (but is likely misapplying)
300.5(B) Wet Locations
This section (specifically in the context of direct-buried cables) requires that cables and raceways installed in wet locations be suitable for the environment. This could be the section they are referencing to classify the inside of the PVC conduit in concrete as a wet location.
Where the Exemption Lies (and your Argument)
You're on the right track. The exception exists within
Article 800 (Communications Circuits). The key to your defense is understanding the scope and application of Article 800 and how it relates to general wiring methods.Here's the pertinent section in the 2023 NEC to review: 800.1 Scope This clearly states that Article 800 covers communications circuits. This is important as it sets the stage for exceptions that are specific to communications circuits. 800.3 Listing and Marking (This is critical to understand). 800.3(C) addresses cabling within buildings and states requirements for horizontal cabling. 800.3(D) states that communications wires and cables shall be listed in accordance with 800.179. This establishes that the cable must be listed for the intended purpose. 800.179 Listing Requirements
This section provides the listing requirements for communications cables. Table 800.179 lists the various cable types and their applications. Notably, Cat6 Plenum cable will be listed as CMP.
300.11(C) Raceways in Wet Locations Above Grade. This section does not apply to communications systems covered in Article 800. This would only pertain to raceways which carry power for the building or facility.
Your Argument to the AHJ
Article 800 governs
Remind the AHJ that Article 800 specifically addresses communications circuits. General wiring rules like those in Article 300 are subordinate to the specific requirements in Article 800 when dealing with communications circuits.2.
Listing is Key
Your Cat6 Plenum cable is listed for its intended use within buildings. The listing process already takes into account typical environmental conditions encountered inside a building.3.
Reasonable Interpretation of "Wet Location"
While the inside of a conduit run in concrete can potentially accumulate moisture, it's not the same as a direct burial or an exposed outdoor location. The NEC doesn't intend to require all in-conduit runs in concrete to be treated as wet locations requiring wet-rated cables. The plenum rated cat 6 cable has to meet very specific burn standards which would be affected if the jacket was also rated for outdoor use.4.
Practical Considerations
Forcing a transition to OSP cable at every ground-level floor box is impractical and adds unnecessary cost and complexity to communications cabling installations.
Important Considerations
Conduit Fill
Ensure you are not exceeding the conduit fill limits for your 3/4" PVC. This is a general wiring rule that still applies.
Sealing
Consider sealing the ends of the conduit if there is a known or anticipated issue with excessive moisture migration. This is a best practice, even if not explicitly required by the NEC in this scenario.
AHJ Authority
The AHJ has the final say. If they remain insistent, you might consider escalating the issue within their department or seeking a second opinion from a different inspector or a qualified electrical engineer.
In Summary:
The NEC acknowledges that communication circuits require special consideration. As long as your cable is listed for its intended use (e.g., CMP for plenum spaces), and you follow other applicable rules (conduit fill, proper support), the AHJ's requirement for wet-rated cable or a splice in this scenario appears to be an overreach of their authority. Carefully and respectfully present your case, referencing the NEC sections detailed above. Flag for review