User: Alwayslearningelec, Location: NJ
Asked on: Friday, October 17, 2025 at 7:39 am EDT
Answered on: Friday, October 17, 2025 at 7:39 am EDT
Question: #9 is the note for below. The dark rectangle below the 60A switch is the VFD. The note that says "VFD with bypass switch" has nothing to do with disconnect? Making sure this is a separate disconnect from the VFD.
You are correct. Based on your description, the note that says "VFD with bypass switch" likely refers to the internal workings of the VFD and its ability to bypass the VFD and run the motor directly from the power source.
Here's a breakdown of why this means it's likely separate from a required disconnect: VFD with Bypass Switch Function
A VFD with a bypass switch is a feature within the VFD unit. It allows you to switch the motor's power source from the VFD output back to the incoming line power. This is for troubleshooting, maintenance, or emergency situations if the VFD fails. The switch is usually located on the VFD unit itself.
Separate Disconnect Requirement
Electrical codes (like the NEC in the US) typically require a separate disconnect switch before the VFD for safety and maintenance purposes. This disconnect allows you to completely de-energize the VFD for servicing or replacement without affecting other parts of the electrical system.
Dark Rectangle (VFD)
You've identified the dark rectangle as the VFD. This confirms that the bypass switch is part of the VFD.
60A Switch
The 60A switch you mention is likely a disconnect switch for the VFD.
In Summary
Yes, the "VFD with bypass switch" note is describing a feature of the VFD unit. You likely also have a separate disconnect, in your case a 60 amp switch. It's critical to understand the difference and to ensure that both are present and functioning correctly according to code. Flag for review