Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: panel location - small offices in mixed-use

User: designer82, Location: Boston

Asked on: Saturday, October 18, 2025 at 3:45 pm EDT
Answered on: Saturday, October 18, 2025 at 3:46 pm EDT

Question: Two small offices (two different tenants) in a mixed-use building with the offices being on the ground floor and residential units above. The offices have no room for a panel to go, any issues with putting the office panels in the basement main electrical room?The meter center will also be in the main electrical room in the basement. The door would need to be and remain unlocked at all times to allow tenant access correct?

Okay, let's break down the scenario and address the potential issues and requirements of putting the office panels in the basement electrical room.

Issues and Considerations


Accessibility

This is the biggest hurdle. NEC (National Electrical Code) requires readily accessible panels.

NEC 240.24(B): Occupant Access.
In a multiple-occupancy building, each occupant shall have ready access to all overcurrent devices protecting the conductors supplying that occupancy. Implication

Each tenant needs to be able to easily and quickly access their panel without requiring permission or special tools. This means the electrical room needs to be kept accessible to them. This is the primary concern.2.

Security/Tenant Privacy

Sharing an electrical room means all tenants have access to each other's panels. This creates potential issues with tampering, liability, and the general feeling of security. Tenants might not be comfortable with other people having access to their electrical panels, even if it's just for breaker resets.3.

Space Constraints in the Electrical Room

Is there truly enough dedicated space for each office's panel in the basement electrical room, without creating obstructions or hazards for other equipment? Crowding can lead to future problems and code violations. The electrical room cannot be used for storage4.

Labeling and Identification

Everything needs to be clearly and permanently labeled. Each tenant's panel must be clearly identified as belonging to their specific office suite. All breakers must be labelled as well. An electrical directory needs to be near each panel and at the main electrical room so tenants can easily determine which breaker feeds which circuit.5.

Landlord Liability

The landlord is responsible for maintaining a safe and code-compliant electrical system. Putting the panels in a shared space increases the landlord's responsibility to ensure the space is kept clear, accessible, and safe.6.

Future Expansion

Consider future expansion. Will there be room in the basement electrical room for adding additional circuits for either tenant without causing problems?

Door Access



Yes, the door must be unlocked or readily accessible at all times for the tenants to access their panels.
This is non-negotiable based on the NEC requirement for occupant access (240.24(B) cited above).

Solutions and Mitigation

If you are set on putting the panels in the basement, here are some ways to mitigate the issues:1.

Dedicated Sub-rooms/Cages

The best solution (and often required by inspectors) is to create separately lockable enclosures (small rooms or sturdy cages) within the electrical room for each tenant's panel. Each tenant gets a key to only their enclosure. This provides the required access while maintaining security. The landlord would still have a master key.2.

Individual Enclosures

Mount the panels in separate, lockable enclosures (NEMA 4 or similar) within the electrical room. This is a simpler version of the dedicated sub-room, offering a degree of security. Each tenant would be provided a key to their individual enclosure.3.

Clear Agreements with Tenants

Even with the above solutions, you should have a written agreement with each tenant outlining the rules for accessing the electrical room, expectations for security, and limitations on what they can do with the electrical panels. This helps prevent misunderstandings and liabilities.4.

Professional Installation and Inspection

Make sure a licensed electrician performs the installation and that it's inspected by the local authority having jurisdiction (AHJ). They can identify potential issues specific to your location and building.

Alternatives to Consider

Before committing to the basement location, seriously consider these alternatives:


Surface-Mount Panels Inside the Office Suites

Even if space is tight, explore compact surface-mount panel options that could be placed in a discreet but accessible location within each office (e.g., behind a door, in a storage closet). You may need to be creative.

Recessed Panels

Are there any areas where a recessed panel could be installed? This would save space, but still maintain accessibility.


Dedicated Electrical Closets

If possible, create small, dedicated electrical closets for each office in a hallway or common area of the ground floor.

In Summary:


While technically possible to put the office panels in the basement electrical room, the requirement for readily accessible panels makes it challenging and potentially problematic. You must ensure the tenants have easy and secure access to their panels. Dedicated enclosures are the typical solution if the panels cannot be located within each tenant space.Consult with a qualified electrician and your local building inspector before making any decisions to ensure your plan meets all code requirements and provides a safe and functional electrical system for your tenants. Flag for review

Previous Question Next Question