User: Jwhitman
Asked on: Monday, October 20, 2025 at 11:33 am EDT
Answered on: Monday, October 20, 2025 at 11:33 am EDT
Question: I work in an industrial environment and have little exposure to residential panels and breakers. Perhaps I could get some help clearing some panel questions I have. I am working on an old GE panel it says use R,TR & TQL breakers. Obviously they are not available. The panel has a couple of old GE breakers and Bryant Type BRD BD 30-20 tandem breakers. I wanted to install a Quad number BRD220230 ( Cutler Hammer) which looked like a good choice. The spec sheet said it was OK for a BR panel. Problem is the face of the breaker does not fit the cut outs in the breaker cover. The breaker is too wide for the cut out. Seems as though the BR 30-20 might fit, but I wanted to have a 2 pole Breaker. Is there a way to confirm what is compatible? This panel is very old and I tried to cross the numbers. I have been trying to cross the Bryant breaker numbers, but maybe this is the wrong approach. Any ideas from those who have dealt with these old panel would really be appreciated.
Okay, let's break down this old GE panel puzzle. It's common to encounter challenges with older equipment, and finding compatible breakers can be tricky. Here's a structured approach to help you find the right solutions
1. Understanding the Original Breaker Types (R, TR, TQL):
R, TR
These are likely referring to older GE breakers, potentially versions of their "Type THQL" breakers. GE's breaker lines have evolved over time.
TQL
This is a more important clue. The GE "Type THQL" breaker is a 1-inch wide breaker, and often the base for their tandem breakers.
2. Panel Identification and Compatibility
Finding the Model Number
Look very closely inside the panel door, on the back of the door, or on the panel enclosure itself. There should be a model number. This is critical for proper research. Often it will start with "TM" or "TLM."
Panel's Breaker Compatibility Label
Sometimes, inside the panel door, there's a label that lists the approved breaker types. This is gold if you can find it.
3. Why the Cutler Hammer BRD220230 Doesn't Fit
BR Panels vs. GE Panels
You've hit a common snag. While Cutler-Hammer (now Eaton) BR breakers are generally considered a compatible replacement for the most common GE 1-inch breakers, the physical profile of tandem (and especially quad) breakers can be different enough that they don't fit perfectly in all panels, especially older ones.
Cover Cutouts
Panel covers are often very specific about the breaker profiles they accept. This is your key problem. The BRD220230 is designed for the BR cutout shape, which, as you've discovered, differs from the GE (likely THQL-based) cutout shape.
4. Your Approach to Finding a 2-Pole Solution
Focus on THQL-Compatible Breakers
Since the panel suggests TQL breakers, focus your search on breakers compatible with that "1-inch" form factor.
Direct Replacement Preferred
The best solution is to find a directly compatible 2-pole breaker that fits the cover cutout.
5. Steps to Take
Find the Panel Model Number (Crucial)
This is the absolute priority. Scour the panel for the full model number.2.
Search for a Compatible 2-Pole Breaker for THQL
Once you know the panel model number, search online for "GE [Panel Model Number] breaker compatibility" or "[Panel Model Number] approved breaker list." Pay close attention to breakers that are specifically listed as replacements for "GE THQL" breakers. You may find a 2-pole GE breaker designed to replace the original THQL types. This would be your ideal situation.3.
Consult an Electrical Supply House
Bring the panel model number (and photos of the panel interior and cover) to a reputable electrical supply house (not just a big box store). Explain your situation. They often have access to cross-reference guides and knowledgeable staff who can help identify compatible breakers, even for older panels.4.
Inspect Carefully Before Installing
Physical Fit
Before buying a large quantity of breakers, purchase one 2-pole breaker that claims to be compatible. Carefully inspect its physical profile and test fit it in the panel and make sure the cover fits over it. This is essential to avoid wasting money on incompatible breakers.
Bus Bar Engagement
Make absolutely sure that the breaker makes solid contact with the panel's bus bars when installed.5.
Important Safety Notes
Never Force a Breaker
If a breaker doesn't fit easily into the panel and the cover doesn't fit over it without force, it's the wrong breaker. Do not try to force it.
Correct Ampacity
Ensure that the breaker's ampacity (e.g., 20A, 30A) matches the wire size and the load it will be protecting.
Qualified Electrician
If you are at all unsure about any aspect of this, consult a qualified electrician. Working with electrical panels can be dangerous.
Regarding the Bryant BRD BD 30-20
While the Bryant BRD BD 30-20 might fit physically, don't assume it's electrically compatible with the panel's bus bar design. Focus on finding breakers specifically listed as compatible with GE THQL.
In summary:
Finding the panel model number is the first* and most important step. Use that information to research compatible breakers and verify the physical fit before making a purchase. Don't hesitate to consult with an electrical supply house or a qualified electrician for assistance. Be thorough, be safe, and good luck! Flag for review