Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Double pole with two neutrals

User: jared123, Location: Texas

Asked on: Monday, October 20, 2025 at 7:59 pm EDT
Answered on: Monday, October 20, 2025 at 8:52 pm EDT

Question: I noticed some installers mistakenly pulled multiple neutrals for number of multi pole breakers.Eg 2 pole breaker with two neutrals that required one. This was corrected but im wondering what effect it would have if a piece of equipment that got two neutrals joined together.Im guessing it would make no difference albeit against code and professionalism.

You're right to question this and to correct it. While it might seem inconsequential in some cases, having multiple neutrals connected to the same piece of equipment can have serious consequences. Here's a breakdown

Why It's Wrong and Potentially Dangerous:
Overcurrent Protection

The fundamental purpose of a neutral conductor is to provide a return path for current. It's sized to handle the maximum
anticipated current from the associated phase conductor(s) (the "hot" wires). If you have multiple neutrals connected together, they will share the return current. However, it's impossible to guarantee that they will share the current equally. One neutral might end up carrying more current than it's rated for, even if the overall load is within the circuit breaker's rating. This can lead to:

Overheating

The overloaded neutral conductor will heat up.

Insulation Degradation

The heat will degrade the insulation on the wire.


Fire Hazard

If the overheating is severe enough, it can ignite nearby materials and cause a fire.

Nuetral Current Imbalance

For multiwire branch circuits using shared neutral, neutral wire is sized at it's maximum unbalanced load. When a neutral is shared, it has to be sized by the neutral current from both hot wires. Adding an additional neutral will allow more current than intended to pass.


Misleading Readings

Using multiple neutrals can skew readings when troubleshooting, making it harder to find problems.

Code Violation

NEC (National Electrical Code) prohibits the practice of connecting multiple neutrals together. It's a violation of safe wiring practices.

What Could Happen if a Piece of Equipment Has Multiple Neutrals Connected to It (Assuming No Other Load)



Ideally, no difference.
If the loads are perfectly balanced and the resistance of each neutral run is identical, the current would divide equally between the neutrals. However, perfect balance is virtually impossible to achieve.

In summary While sometimes, no problem may occur when multiple neutrals are utilized; it is generally against code. In the event of problems due to unbalanced load, the dangers can include overloading, over heating, fire hazard, and difficulty in troubleshooting. Flag for review

Previous Question Next Question