Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: One building fed from another, with a twist

User: scotteng, Location: Apollo Beach, FL

Asked on: Wednesday, October 22, 2025 at 3:47 pm EDT
Answered on: Wednesday, October 22, 2025 at 3:48 pm EDT

Question: We design grocery store anchored neighborhood retail shopping centers. These all have an inline retail building attached to one side of the grocery store. The grocery store has a dedicated electrical service fed by a dedicated transformer. The retail building has a separate transformer that feeds a typical retail service setup, generally a trough with multiple meter/main disconnects for each tenant suite. The grocery anchor is now locating their separate liquor stores in the first tenant bay of the adjacent inline retail. The grocery store wants to feed this first suite directly from their service because their store is on generator backup and this ensures the liquor store would also have generator backup. To date, what we have been feeding that tenant suite through a double-throw switch on the outside of the suite. The retail and the grocery store provide the two inputs of the double throw switch with the liquor panel being the output. We believe 225.30(A)(4) and/or (6) permits this scenario given that the grocery store is backed up by an optional standby generator and this provides "additional reliability". The grocery tenant is now asking if we an omit the retail service feed altogether because they will never use it and the liquor store will be powered from the grocery store service at all times (as opposed to someone throwing the switch if the retail service goes down). I believe providing a dedicated second feeder from a separate building no longer meets one of the exceptions under 225.30(A). What are the opinions on having a multi-tenant building where four of the five tenant suites are fed from a the retail service but one tenant suite is fed from another building? Is this permitted? I am aware of the grounding concerns with this scenario, but this is strictly a question regarding what the second feeder is permissible.

Okay, let's break down the issue of feeding a tenant space in a multi-tenant retail building from a service in an adjacent, separately serviced grocery store. Your initial understanding is mostly correct, and I'll elaborate on why your proposed solution of eliminating the retail feed is problematic.

The Core Issue: 225.30 and Multiple Feeders

NEC 225.30 generally limits the number of feeders or branch circuits supplying a single building or other structure. You're right to focus on this code section. The general rule is ONE feeder or branch circuit. The challenge is figuring out if any of the exceptions apply to your specific situation.

Why the Double-Throw Switch Was (Arguably) Acceptable

The double-throw switch setup could be defended under one of the exceptions, likely 225.30(A)(4) or (A)(6), but there are nuances. 225.30(A)(4) - Standby Power Systems

This exception allows an additional feeder for a standby power system
where the standby system is required by the code. A voluntary generator system would not qualify.

225.30(A)(6) - Additional Reliability

This is the more likely exception you were considering. It allows for an additional feeder if "documented" to provide additional reliability. This is where the argument gets tricky. "Documented" generally requires some sort of engineering study or rationale demonstrating the increased reliability provided by the second feed. The presence of a generator alone doesn't automatically qualify. It's assumed that the generator provides a higher level of reliability and not simply an amenity. Why it worked (kinda): The double-throw switch arrangement implies that the retail service is the primary power source, and the grocery store feeder is only used when the retail service fails, triggering the generator at the grocery store. You're effectively supplementing the retail service with a standby source when the retail service is down.
Why Eliminating the Retail Feed is a Problem


You are right to be concerned about eliminating the retail feed. Here's why it runs afoul of 225.30 and becomes much harder to defend:1. No Longer Supplementing, but a Primary Source

If the liquor store
never uses the retail service and is always powered from the grocery store's service, it is

no longer
an additional source of power for reliability. The grocery store's feeder is the sole source of power. This is not permitted unless an exception is met.2. Essentially Two Buildings Now Acting as One

By permanently feeding the liquor store from the grocery store's service, you are electrically linking two
separate buildings (the grocery store and the retail building) in a way that's not permitted by the NEC without meeting an exception. Each building should have its own service and distribution system. The exception that seemed to permit the use of a double-throw switch (enhanced reliability) is no longer in play because you have eliminated the retail service feed entirely.3.

Code Intent

The intent of 225.30 is to prevent overly complex and potentially unsafe electrical systems. Multiple feeders introduce complexities in fault current coordination, grounding, and overall system management.

The Grounding Nightmare (Briefly Mentioned, But Critical!)


You mentioned grounding concerns. These are significant and can't be overlooked. With a permanent feed from the grocery store, you
will need to address: Bonding and Grounding

Ensuring proper bonding and grounding between the two buildings to avoid circulating currents and voltage potential differences. This might involve running an equipment grounding conductor (EGC) back to the grocery store's service, and potentially supplementary grounding electrodes at the retail building.

Shared Neutral

A shared neutral conductor running between two buildings is generally prohibited.

Is it Permitted? No.


The scenario as you describe it – permanently feeding a tenant space in a multi-tenant retail building from a service in an adjacent grocery store,
with no connection to the retail building's service – is not permitted under the NEC, specifically 225.30. You would be violating the single feeder/branch circuit rule for the retail tenant's building without a valid exception.

Possible (and difficult) Solutions

There are a few potential ways you
might try to make this work, but they all have significant drawbacks and require careful consideration:1. Re-Evaluate 225.30(A)(6) – "Additional Reliability"

Can you
truly and legitimately document a case that the grocery store's generator-backed feed provides a significant and

documented
level of additional reliability that couldn't be achieved by simply adding a generator to the retail building's service? This is a very high bar to clear and would require an engineering study. The AHJ (Authority Having Jurisdiction) would likely be very skeptical. Keep in mind that "documented" doesn't mean you can simply state something. It must be justified.2. Integrate the Buildings Electrically

This is a drastic and likely impractical solution. Could you legally and physically combine the grocery store and the retail building into a single "building" for electrical service purposes? This would likely require significant structural changes and legal approvals, and it might still not be accepted by the AHJ.

The Recommended Solution


The simplest and most compliant solution is to:1. Provide a dedicated subpanel for the liquor store within the retail building and feed it from the retail building's service (the traditional approach).2. Install a small generator dedicated to the retail building and sized only to power the liquor store. This keeps the liquor store's essential loads powered during an outage of the main retail service.This approach ensures compliance with the NEC, avoids complex grounding issues, and provides the desired backup power for the liquor store without violating the code's intent. While it may require additional expense, it's the safest and most reliable solution in the long run.

Disclaimer:
I am an AI Chatbot. This information is for general guidance only and does not constitute professional electrical engineering advice. Consult with a qualified electrical engineer and your local AHJ for specific project requirements and code interpretations.* Flag for review

Previous Question Next Question