User: kjroller, Location: Dawson Mn
Asked on: Wednesday, October 22, 2025 at 5:21 pm EDT
Answered on: Wednesday, October 22, 2025 at 5:22 pm EDT
Question: If I have a 120v heater and I cut the Neutral so current can't make its way back to source will the hot wire still have any current on it. From how I understand it the answer is no as it won't trip a GFCI breaker as there is no imbalance. Let me know what you think thank you.
You are correct. Here's a breakdown of why: The Nature of a Circuit
Electricity requires a complete circuit to flow. This means it needs a path from the source (hot/live wire), through the load (the heater), and back to the source (neutral wire). If you cut the neutral wire, you've broken this complete path.
No Current Flow
With a broken neutral, there is no path for electrons to flow. Therefore, there will be no current on the hot wire because the circuit is incomplete. Think of it like a water pipe: if you cut the return pipe, the water won't flow through the faucet, even though the supply pipe is still pressurized.
GFCI Behavior
A GFCI (Ground Fault Circuit Interrupter) monitors the current going out on the hot wire and compares it to the current returning on the neutral wire. If there's a significant difference (typically 5mA or more), it indicates a ground fault (current leaking to ground) and it trips to cut off the power. In your scenario, since there's no current flowing at all (because the neutral is cut), there is no imbalance between the hot and neutral. Therefore, the GFCI will not trip.
Important Safety Considerations
Never intentionally break the neutral wire of a live circuit for testing purposes. This is extremely dangerous. While theoretically no current flows, there are residual voltage effects to consider. Always de-energize a circuit before working on it. This means turning off the breaker that supplies power to the circuit and verifying that the circuit is indeed de-energized using a reliable voltage tester.* Cutting the neutral is not a safe or reliable method of disabling a circuit.In summary: Cutting the neutral on a 120V heater circuit will stop current flow on the hot wire, and a GFCI will not trip, but this is an extremely dangerous and unsafe practice and should never be done with a live circuit. Flag for review