User: Pinnie, Location: Ohio
Asked on: Friday, October 24, 2025 at 6:58 pm EDT
Answered on: Friday, October 24, 2025 at 6:58 pm EDT
Question: I’ve heard the word distribution or distribution wiring thrown around. What is that referring to. It’s not defined in article 100.
You're right, "distribution wiring" or "distribution" isn't a formally defined term in Article 100 of the National Electrical Code (NEC). It's a more general term used in the electrical industry to describe the part of the electrical system that carries power from the service equipment (where the utility supply enters a building) to the branch circuits that feed individual loads like lights, receptacles, and appliances.Think of it this way: Utility Supply
Power comes from the utility company.
Service Equipment
This is the main panel or disconnect where the utility supply is connected. It includes the main breaker and grounding/bonding connections.
Distribution Wiring
This is the wiring between the service equipment and the various subpanels or individual circuits. This can include feeders to subpanels, or even large branch circuits to big equipment.
Branch Circuits
These are the final circuits that run from a panelboard (either the service equipment or a subpanel) to the actual loads (lights, outlets, appliances).Here's a breakdown of what distribution wiring typically includes:
Feeders
These are the conductors that carry power from the service equipment (main panel) to subpanels. They are larger conductors designed to handle the combined load of all the branch circuits supplied by the subpanel.
Subpanels
These are smaller panelboards that are fed by feeders from the main panel. They allow you to distribute power to different areas of a building or specific loads.
Large Branch Circuits
In some cases, a distribution network might include very large branch circuits that feed major equipment like HVAC systems, large machinery, or electric vehicle chargers. These circuits could be considered distribution because they serve a significant, dedicated load.
Wiring Methods
The wiring methods used in distribution wiring can vary depending on the application, location, and local codes. Common methods include: Conduit (rigid metal conduit, electrical metallic tubing, etc.) Cable (Type MC, Type AC, etc.) Busway (in larger industrial applications)Key characteristics of distribution wiring:
Higher Current
Distribution wiring typically carries higher currents than branch circuits because it's supplying multiple loads or a large single load.
Voltage Drop
It's crucial to properly size distribution wiring to minimize voltage drop. Excessive voltage drop can cause equipment to malfunction, overheat, or operate inefficiently.
Protection
Distribution wiring is protected by overcurrent devices (circuit breakers or fuses) at both the source (service equipment or subpanel) and the load end (subpanel or equipment).*
Code Compliance
All distribution wiring must comply with the NEC and any local electrical codes. This includes proper sizing, wiring methods, grounding, and overcurrent protection.
In summary: Distribution wiring is the infrastructure that moves power from the service entrance to the various points within a building where it's needed. It's the backbone of the electrical system, ensuring that power is delivered safely and efficiently to all the loads. While not a precisely defined term in the NEC, understanding its function is essential for electrical design and installation. Flag for review