User: TwoBlocked, Location: Bradford County, PA
Asked on: Tuesday, October 28, 2025 at 6:14 pm EDT
Answered on: Tuesday, October 28, 2025 at 6:15 pm EDT
Question: Had installed a ADJA15034200RS 150 amp reverse service receptacle feeding a 100 amp manual transfer switch as a back up connection for a roll-in generator. I went with the 150 amp receptacle because it would take 1/0 conductors, which I thought at the time is what I would use. Ended up using #2 which is neither hear nor there. Also I understood at the time that the 150 amp receptacle would accept either the 100 amp plug or the 150 amp plug and informed the customer. Asking if they wanted us to provide a plug, they said they would worry about that later and they were pretty sure they had one.Soooo, now they need one and their regular supplier is quoting them a 150 amp plug with a 3 week lead time, which they weren't happy about. I reached out to one of our suppliers and they came up with a ACP1034CDRS in stock at one of their stores and decided to send it to us before we decided to approve it (Arrrggghhh!!!). Told the customer we had one coming without approval, so he decided to cancel the order from his supplier. To make things a bit uglier, the invoice they sent is a ACP1034CD (no RS meaning not reverse service.) It was supposed to arrive today, but did not. Perhaps when it does arrive it will be a reverse service after all...So here's where I could use some help:Am I correct in thinking that since the receptacle is reverse service (meaning male) the plug also needs to be reverse service (meaning female)?Will a ACP1034CDRS work with a ADJA15034200RS? I've reached out to Appleton by phone and by email - crickets.
Let's break this down step-by-step
1. Reverse Service (RS) Terminology:
Yes, you are absolutely correct. "Reverse service" designates that the receptacle is male (blades) and the plug is female (contacts). This is crucial for preventing accidental energization of the generator cord and is a key safety feature.2. Compatibility of ACP1034CDRS and ADJA15034200RS
The Big Unknown
This is where the difficulty lies. Manufacturers don't always provide explicit compatibility charts. You need to confirm this before your customer is left with incompatible parts.
Appleton Data Sheets Are Key
This is why Appleton's silence is frustrating. You need the data sheets for both the receptacle (ADJA15034200RS) and the plug (ACP1034CDRS). Specifically, you need to confirm the:
Amperage Rating
This is good in that the receptacle is 150 amp and the plug is 100 amp. If you get a 150 amp plug, and the generator is only supplying 100 amps, the generator cord needs to be protected with a 100 amp fuse.
Voltage Rating
240 volts
Number of Poles and Wires
Verify they are the same (e.g., 3 pole, 4 wire).
Wiring Diagram
Extremely important. The pin/blade arrangement must match for the plug to physically connect to the receptacle.
Physical Dimensions
Again, critical. Will it plug in?
Assumption is Dangerous
Never assume they are compatible. Even if they look similar, slight variations can prevent proper connection.
3. The Incorrect Plug (ACP1034CD)
Confirm its Existence
The fact that the invoice doesn't say "RS" is a major red flag. As you correctly pointed out, if it's not "RS," it's the wrong type. It will be female (blades) and won't plug into your male (blades) receptacle.
4. Recommended Actions (Prioritize)
Immediate Confirmation of the Plug
As soon as the plug arrives, visually inspect it to confirm it is reverse service (female contacts). If it is not, send it back immediately.
Continue Contacting Appleton
Keep trying Appleton! Call again, email again, use their website's contact form. The sooner you get confirmation the better.
Find and Download Data Sheets
Search on Google for the data sheets for both the ADJA15034200RS and the ACP1034CDRS. You need to find them, download them, and compare the pin/blade configurations.
Local Electrical Supply House Expertise
Visit a large, reputable electrical supply house that specializes in industrial connectors. Bring pictures, part numbers, and descriptions of your situation. They might have the expertise to definitively tell you if these connectors are compatible and can look up that information, if you cannot.
Document Everything
Keep a record of all your communications, order numbers, and discussions.
If in doubt, buy a new plug, even if you have to pay a premium. The plug should be the correct type to match the receptacle. Advise the Customer
As gently as possible, explain to the customer the challenges you're facing and the need to confirm compatibility. Tell them you're doing everything you can to resolve the situation and that you're committed to getting them the correct plug. If you do need to purchase a new plug and want to pass that cost along, this is also a good time to let them know.
Important Considerations
Legality and Liability
You are responsible for providing a safe and code-compliant installation. If you install an incompatible connector that leads to damage, injury, or death, you will be liable.*
Local Codes
Ensure your installation meets all local electrical codes.
In summary, you're on the right track by questioning the compatibility. You've identified the potential problems. Now you need to gather the definitive information required to make an informed decision. Good luck! Flag for review