Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Inset loadcenter into cabinet?

User: JoeNorm, Location: WA

Asked on: Wednesday, October 29, 2025 at 8:50 am EDT
Answered on: Wednesday, October 29, 2025 at 8:50 am EDT

Question: I have a contractor wanting to install a panel so that it is inset into an existing built-in cabinet. Imagine the panel being placed into a small nook, maybe 10" deep.Does this raise working clearance concerns? Does the flush edge of the panel need to maintain a clear plane for 30" from the centerline?They ultimately want to be able to close a cabinet door to hide the panel.

You're right to be concerned about working clearances and covering the panel. Here's a breakdown of the code considerations and what your contractor needs to do to ensure a safe and compliant installation

Key Concerns: Working Clearance and Accessibility
Working Clearance (NEC 110.26)

This is the primary concern. The National Electrical Code (NEC) requires specific clearances in front of electrical equipment like panels for worker safety when servicing the equipment.


Accessibility (NEC 110.25)

The panel needs to be readily accessible. Meaning that the panel must be able to be accessed without moving things, climbing, or using a ladder.

Dedicated Electrical Space (NEC 110.26(E))

Space above and below the panel must be dedicated to electrical equipment.

Specifics related to Inset/Flush Mounting


Depth of the Nook and Working Clearance

The 10" deep nook is a
major red flag.

30" Width

This is the clearance measured horizontally, centered on the panel. The panel needs to be installed so that you can open it, and reach the furthest breakers inside, while still standing in the 30" wide work space.

Minimum Depth (Distance from the Front of the Panel)

The required depth varies based on voltage and conditions (insulated vs. uninsulated parts, grounded parts present). For a typical residential 120/240V panel, you'll need at least 3 feet (36") of clear space in front of the panel, and potentially more depending on the specific installation.
This is measured from the face of the panel cover when it is mounted.



Minimum Height

Generally, you need at least 6.5 feet (78 inches) of headroom above the panel or the height of the equipment, whichever is greater.2.

The Flush Edge and Clear Plane

The face of the panel needs to be within the required clearance depth. So, if you're already 10" into a nook, you've already eaten away a significant portion of your depth clearance.3.

Covering the Panel with a Cabinet Door

This is generally prohibited, and can only be considered with a specific design, and a permit from your local inspector.

Accessibility

The panel must be readily accessible
without having to unlock or use a tool to open a cabinet door. Closing the door violates that requirement.

Clear Marking

It's important to be able to tell where the panel is, even when the door is closed, for fire and safety purposes.

Ventilation

Cabinets often don't provide enough ventilation, which can cause the panel to overheat.

What Your Contractor Needs to Do (and You Should Verify)


Consult the NEC

Your contractor
must be familiar with NEC Article 110, especially section 110.26 (Working Space About Electrical Equipment).
2.


Calculate Clearances

They need to precisely measure the proposed location and determine if the required working clearances can be met
after the panel is installed in the nook.3.

Consider Alternatives



Relocate the Panel

This is often the best option. Find a location where working clearances can be easily met.

Surface Mount

Instead of recessing, surface-mount the panel. This often makes clearance easier to achieve.


Modify the Cabinet

It might be possible (though likely expensive) to significantly modify the cabinet to create the necessary working space.4.

Submit Plans and Obtain Permits

Any electrical work requires permits. The plans should clearly show the panel location and how working clearances will be maintained.5.

Inspection

The installation must be inspected by a local electrical inspector. They will verify compliance with the NEC.

In Summary

Insetting a panel into a 10" deep nook almost certainly violates working clearance requirements. Covering the panel with a cabinet door is generally not permitted. Your contractor needs to prioritize safety and code compliance. They should be willing to explore alternative solutions and obtain the necessary permits. Don't be afraid to get a second opinion from another licensed electrical contractor.

Disclaimer: I am an AI chatbot and cannot provide professional electrical advice. This information is for general guidance only. Always consult with a qualified and licensed electrician for your specific situation. Flag for review

Previous Question Next Question