Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 1970 house no ground on original heard before the addition

User: acutabove, Location: 3LoganBlakeAva

Asked on: Thursday, October 30, 2025 at 11:03 pm EDT
Answered on: Thursday, October 30, 2025 at 11:47 pm EDT

Question: I have done a lot of electric jobs with my father before he passed first time seeing in addition and the old part has two wire and no ground wire in Outlets or switches with metal box and the old owners put three-pronged Outlets before the sale. My question is how can I easily obtain a ground wire also there is no grounding screw from the metal box to the new plugs and no conduit so my question is should I add a pigtail off the metal box to the new plug or can I just run Newgrounds from each metal box to a junction in the basement and then run one main ground to the panel. Trying to help my buddies kid out that just bought this house that he paid way too much for any advice would be very welcomed and much appreciated

Okay, I understand the situation. You're dealing with an older house that has two-wire electrical systems without grounding, and someone previously installed three-prong outlets without properly grounding them. This is a common and potentially dangerous situation. Here's a breakdown of the problem and possible solutions, keeping safety and code compliance as top priorities

Understanding the Problem:
Ungrounded Outlets are a Hazard

Three-prong outlets need a ground to provide a safe path for fault currents. Without a ground, if an appliance has a short circuit, the metal chassis can become energized, posing a shock hazard.


"Bootleg" Grounds

Installing three-prong outlets in an ungrounded system without providing a proper ground is dangerous and a code violation. It creates a false sense of security.

Two-Wire Systems

Older homes often use two-wire systems (hot and neutral) without a separate ground wire. Metal boxes in these systems may or may not have been properly grounded in the past.

Important Safety Note

Electrical work can be dangerous. If you're not completely comfortable and knowledgeable,

hire a licensed electrician.
This is especially important when dealing with potentially ungrounded systems. They can properly assess the situation and provide the safest and most code-compliant solution.

Possible Solutions (in order of preference/effectiveness)


Rewiring

This is the
best and safest option, but also the most expensive and disruptive. Rewiring involves replacing the existing two-wire cables with three-wire cables (hot, neutral, and ground) throughout the house. This provides a dedicated ground wire to each outlet and switch, bringing the electrical system up to modern safety standards.2.

Grounding from a Nearby Grounded Source (if possible)

This must be done correctly and should only be attempted by someone very knowledgeable in electrical work.



Check for Existing Ground

Look for any nearby grounded sources. A metal water pipe that leads directly to the earth is a suitable grounding electrode.

HOWEVER, be extremely careful! Test the water pipe for voltage before touching it. Use a multimeter to check between the water pipe and the neutral wire. There should be no voltage. If there is, do not use it.

Run a Ground Wire

If you find a suitable grounded source, you can run a ground wire (green or bare copper) from that source to the metal box. Use appropriate grounding clamps and connectors. Then, pigtail from the metal box to the ground terminal of the new outlet. This effectively grounds the box and the outlet.


Bonding to Metal Water Pipes

If you use a metal water pipe, it's often necessary to bond (connect with a heavy gauge wire) the water pipe to the electrical service panel. This ensures a consistent ground potential throughout the system.3.

GFCI Protection

While it doesn't provide a true ground, installing GFCI (Ground Fault Circuit Interrupter) outlets or a GFCI breaker for the circuit offers a significant safety improvement. GFCI's detect even small ground faults and quickly cut off power, preventing electric shock.

However, GFCI protection is not a substitute for a proper ground.

GFCI Outlets with "No Equipment Ground"

When installing a GFCI outlet in an ungrounded circuit, you
must use the "no equipment ground" label that comes with the GFCI outlet. This label indicates that the outlet is GFCI-protected but does not have a ground. It's important for future users to be aware of this.4.

Using an Isolated Ground Outlet This requires running an insulated ground wire from the receptacle to the service panel ground. Be sure to check local code requirements.

What
NOT to Do



Don't just connect the ground wire to the neutral wire. This is extremely dangerous and can create a shock hazard. It's called a "bootleg ground" and is a code violation.

Don't rely on the metal box as the only ground. Metal boxes can become loose or corroded over time, breaking the ground connection. Always use a pigtail from the box to the outlet.


Don't ignore the problem. Living in an ungrounded house is a safety risk. Take steps to address the issue.

Addressing Your Specific Questions



Adding a Pigtail from Metal Box to Outlet

Yes, if you can establish a good ground to the metal box, a pigtail from the box to the ground terminal of the outlet is essential. Make sure the pigtail is properly sized and securely connected. Use a grounding screw and a crimp-on connector (or a screw with a wrapped wire) to make a reliable connection to the box.

Running New Grounds to a Junction in the Basement and Then to the Panel

This might be a code violation. The code calls for dedicated grounds. It might be permissible to run individual ground wires from each box back to the main panel, creating a "star" ground system. However, you must be absolutely certain that the wires are sized correctly and securely connected. A single ground wire to the panel is not the best approach.

Code Considerations

The National Electrical Code (NEC) and local building codes govern electrical installations. Make sure you are familiar with and comply with all applicable codes. Code requirements vary by location, so it's essential to check with your local building department. The NEC has specific rules for grounding and bonding.

Steps to Take


Consult a Licensed Electrician

The best first step is to have a licensed electrician inspect the electrical system and provide a professional assessment and recommendations. They can determine the safest and most code-compliant solution.2.

Determine the Best Approach

Based on the electrician's assessment, decide on the most appropriate solution, taking into account the budget, the extent of the problem, and safety considerations.3.

Obtain Permits

If you're doing significant electrical work, you'll likely need to obtain permits from your local building department.4.

Follow Safe Practices: If you're doing any electrical work yourself, always turn off the power to the circuit before working on it. Use appropriate safety equipment, such as insulated tools and a voltage tester.In summary, while GFCI protection is helpful, it's not a replacement for a true ground. Rewiring is the best option for safety, but grounding from a nearby grounded source is the next best option. Consult with a licensed electrician is always the best starting point. Good luck helping your buddy's kid out! Flag for review

Previous Question Next Question