User: Stevenfyeager, Location: United States, Indiana
Asked on: Friday, October 31, 2025 at 7:19 am EDT
Answered on: Friday, October 31, 2025 at 7:19 am EDT
Question: there are several battery back up fluorescent light fixtures. We are replacing all the light fixtures with LED, but only replacing the bulbs and removing ballasts or bypassing them. But I don’t know what to do for the emergency battery backup fixtures.Do you recommend buying new fixtures?If so, what brand is there?Thank you so much
You're right to consider the emergency lighting system carefully. Replacing the fluorescent tubes with LED tubes that bypass the ballast leaves the emergency battery backup functionality in a gray area, and likely non-functional. Here's a breakdown of your options and recommendations
Why Bypassing Ballasts Changes Things:
Original Design
Battery backup fixtures are designed to work with the specific ballast and fluorescent tubes. The battery system provides the necessary voltage and current to power the tube through the ballast during a power outage.
Bypassing
When you bypass the ballast, you're fundamentally changing the electrical characteristics of the circuit. The battery backup system may not be able to deliver the correct voltage/current needed by the LED tubes, even if they are designed to operate directly off line voltage.
Safety and Code
Emergency lighting systems are critical for safety. Tampering with the original design may violate local building codes and could create a safety hazard if the lights fail during an emergency.
Options and Recommendations
1. Replace with Dedicated LED Emergency Fixtures (Highly Recommended) Why it's Best
This is the safest, most reliable, and code-compliant option. Dedicated LED emergency fixtures are designed from the ground up to work with their integrated battery backup systems.
How it Works
These fixtures typically have two main components:
Standard LED Driver
Powers the LED during normal operation (when AC power is present).
Emergency LED Driver/Battery Pack
Detects a power outage and automatically switches to battery power to run the LED at a reduced light output for a specified duration (usually 90 minutes or more, depending on code).
Brands to Consider (USA)
Lithonia Lighting
(Acuity Brands) A very popular and reputable brand. They offer a wide range of emergency lighting solutions.
Hubbell Lighting
Another well-known brand with a broad portfolio.
Eaton (Cooper Lighting)
Offers robust and reliable emergency lighting products.
Emergi-Lite (Thomas & Betts)
Specializes in emergency lighting solutions.
Philips
A global leader in lighting, also offers emergency fixtures.
Important Considerations when choosing LED emergency fixtures
Light Output (Lumens)
Ensure the emergency light output is sufficient for safe egress in your space. Local codes specify minimum illumination levels.
Battery Backup Duration
Typically 90 minutes is required by code, but verify local requirements.
Operating Temperature
Make sure the fixture is rated for the temperature range of your installation environment.
Mounting Options
Choose fixtures that are compatible with your existing mounting locations.
UL Listing
Verify the fixture is UL-listed for emergency lighting applications.
Testing Features
Look for fixtures with self-testing capabilities, which automatically test the battery backup system at regular intervals.
2. Retrofit with LED Emergency Drivers (Less Recommended, Proceed with Caution) What it is
Instead of replacing the entire fixture, you might be able to retrofit your existing fixture with a separate LED emergency driver and battery pack. This driver would be wired between the LED tubes and the normal AC power supply, and would switch to battery power during an outage.
Why it's Less Recommended
Compatibility
Finding an emergency driver that's truly compatible with your specific LED tubes and fixture configuration can be challenging. You must match the voltage, current, and wattage requirements of the LED tubes.
Complexity
Installation can be complex and requires a good understanding of electrical wiring.
Code Compliance
Meeting code requirements with a retrofit solution can be tricky. It's essential to have an electrician inspect the installation and ensure it meets local regulations.
Reliability
The reliability of a retrofit system may not be as high as a dedicated emergency fixture.
If you consider this option
Consult a Qualified Electrician
This is absolutely essential. An electrician can assess the compatibility of your system and ensure a safe and code-compliant installation.
Research Thoroughly
Carefully research emergency LED driver options and confirm they are compatible with your LED tubes.
3. Do Nothing (Not Recommended) Why it's a Bad Idea
Leaving the existing battery backup system connected to the bypassed fluorescent fixture circuit is not only likely to be non-functional but could also be a safety hazard. The original ballast and battery system were designed for the specific electrical characteristics of the fluorescent tubes, and using them with LED tubes could lead to:
Malfunctions
The system may not work at all during a power outage.
Overheating/Fire Hazard
The mismatched components could cause overheating or even a fire.
Code Violations
You're likely violating local building codes related to emergency lighting.
Important Considerations (Regardless of Which Option You Choose)
Consult a Qualified Electrician
Emergency lighting systems are critical for safety. Always consult with a licensed electrician to ensure your installation is safe, reliable, and code-compliant. They can help you choose the right fixtures or components, perform the installation correctly, and verify that the system functions properly.
Local Building Codes
Emergency lighting requirements vary depending on your location and the type of building. Check with your local building department to understand the specific codes that apply to your project.
Testing and Maintenance
Emergency lighting systems require regular testing and maintenance to ensure they function properly. Follow the manufacturer's recommendations for testing and battery replacement.
In Summary:
Replacing your existing battery backup fluorescent fixtures with dedicated LED emergency fixtures is the best and safest option. It ensures code compliance, reliability, and proper functionality during a power outage. While retrofitting is possible, it's generally more complex, less reliable, and requires careful planning and execution by a qualified electrician. Do not simply leave the existing battery backup system connected to the bypassed fluorescent fixture circuit.When getting quotes, be sure to specify that you need emergency LED fixtures, not just regular LED fixtures, to get the correct equipment. Good luck! Flag for review