Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Supporting with conduit.

User: Pinnie, Location: Ohio

Asked on: Friday, October 31, 2025 at 1:48 pm EDT
Answered on: Friday, October 31, 2025 at 1:50 pm EDT

Question: Gentlemen, what is your opinion on using conduit as a mechanical means of support? Obviously, it’s generally not permitted when it’s used as a raceway. However, let’s say you want to hang a strip fixture, with aerial cable, from a piece of EMT that contains nothing and is installed specifically for that purpose. I could see an inspector having an issue with it, but I would argue that it’s not a conduit/raceway installed as part of the complete electrical system. Therefore, it’s just a mechanical means of support.

This is a great question that hits on a gray area in the interpretation of the National Electrical Code (NEC) and other electrical regulations. Here's a breakdown of the arguments for and against, along with my opinion

Arguments Against Using Conduit Solely as Mechanical Support:
NEC and Code Restrictions

The primary argument against this practice is that the NEC is primarily designed and intended for the safe installation of electrical
wiring and equipment. Using conduit solely for mechanical support technically circumvents the intended purpose of the code. While the code doesn't explicitly forbid this in all circumstances, it focuses on electrical systems. Many inspectors take a restrictive view on the issue.

Lack of Specific Engineering/Testing

Conduit is designed to withstand certain mechanical stresses when used as a raceway for conductors. However, if used solely for support, it might not be engineered or tested for the specific load being applied. While you may be able to calculate load capacity, the inspector may require an engineer's stamp.

Inspector Discretion

Ultimately, a lot depends on the interpretation of the local electrical inspector. They have the authority to approve or disapprove installations based on their assessment of safety and compliance, even if it's not explicitly prohibited. They might be concerned about the precedent it sets or potential misuse.


Potential for Misunderstanding/Future Problems

A conduit used solely for support could be misinterpreted in the future. Someone might assume it's an active raceway and try to run conductors through it, creating a hazardous situation.

Arguments For Using Conduit Solely as Mechanical Support (in your specific scenario)



No Electrical Function

You are specifically stating that the conduit is
not used as a raceway. It's solely acting as a mechanical support member.

Load Calculation and Safety

If you can demonstrate that the conduit is adequately sized and secured to safely support the strip fixture and aerial cable, you've addressed the primary safety concern. Calculations, manufacturer's specifications for the conduit, and proper installation methods are crucial here.

Distinction from Electrical System

You're making the argument that because the conduit doesn't contain electrical conductors, it falls outside the core scope of the electrical code. It's acting more like a metal beam or support structure.


Practicality and Cost-Effectiveness

Conduit, especially EMT, is readily available, relatively inexpensive, and easy to work with. It can be a practical solution for hanging lightweight fixtures.

My Opinion

I lean towards the "proceed with caution" approach. Here's how I would handle this situation:1.

Contact the Local Inspector First

Before you even start the work, talk to the electrical inspector. Explain your plan, provide the details (fixture weight, cable type, conduit size, support method), and ask for their opinion. This is the most important step. Getting their approval beforehand can save you a lot of headaches later.2.

Provide Detailed Documentation

Be prepared to provide documentation, including: Load calculations showing the conduit can handle the weight of the fixture and cable with a sufficient safety factor. Manufacturer's specifications for the conduit, including its load-bearing capacity. Details on how the conduit will be securely fastened to the building structure (type of fasteners, spacing, etc.).3.

Over-Engineer (Slightly)

If you're unsure, err on the side of caution. Use a slightly larger conduit size or a more robust support method than you think you need. This can help alleviate any concerns about safety.4.

Mark the Conduit Clearly

If the inspector approves, clearly label the conduit as "MECHANICAL SUPPORT ONLY - DO NOT USE AS RACEWAY" at regular intervals. This helps prevent future misunderstandings.5.

Consider Alternatives

If the inspector is strongly opposed, explore alternative support methods. Unistrut, threaded rod, or dedicated support brackets might be more readily accepted.

In summary:
While your argument has some merit, the reality is that the electrical inspector has the final say. Approaching them proactively, providing thorough documentation, and being willing to compromise are your best strategies for getting your plan approved.Ultimately, safety* is the paramount concern. If you can demonstrate that your installation is safe and meets all applicable building codes (not just electrical codes), you have a better chance of getting approval. Good luck! Flag for review

Previous Question Next Question