User: Stevenfyeager, Location: United States, Indiana
Asked on: Friday, October 31, 2025 at 2:22 pm EDT
Answered on: Friday, October 31, 2025 at 2:22 pm EDT
Question: In this coach light fixture, it has a photo cell only 7/16 inch thick is barely wider than its quarter inch threaded ‘eye’ that sticks through the fixture base, that’s all the room we have to work withThe house side of the hole for the photocell is 1/8” inch close to the brick just inside the texture baseThe manufacturer quit making parts 10 years ago. The brand of photo cell is capital RU us. But the two capital letters are backwards. Model number PC – 001.The smallest photo cell we found is three-quarter inch thick. Any ideas? Thank you.
This is a tough situation, but let's explore some options given the size constraints and discontinued parts
Understanding the Challenge:
Extremely Limited Space
7/16" thickness is incredibly restrictive.
Discontinued Parts
Finding a direct replacement is likely impossible.
Proximity to Brick
This limits modification possibilities on the house side.
Small Hole Diameter
Limits your ability to use larger components or modify the hole easily.
Possible Solutions (in roughly increasing order of complexity/risk)
Scouring for "New Old Stock" (NOS)
EBay & Online Auctions
This is your best initial bet. Search for: "Capital RU US photocell PC-001" (try variations on the name too, misspellings, etc.) "Vintage photocell lighting" (you might get lucky and find a similar fixture with the same photocell.) "Miniature Photocell" or "Subminiature Photocell" (more generic searches)
Antique Lighting Stores/Repair Shops
Call around to local shops that specialize in antique or vintage lighting. They might have a stash of old parts. Describe the photocell in detail.
Online Electrical Supply Forums
There are forums dedicated to electrical contractors and hobbyists. Post your situation and photos on these forums. Someone might have a spare or a source.2.
Salvage & Repair (If You Have the Original)
Careful Disassembly
If you have the old photocell, VERY carefully disassemble it (if possible). Take detailed photos as you go. The failure point is likely a capacitor, resistor, or the photocell itself.
Component Testing
Use a multimeter to test the components inside. Look for shorts, opens, or out-of-spec readings.
Component Replacement
If you identify a bad component, try to find a replacement with the exact same specifications. This can be tricky with older components. Small electronics repair shops might be able to help.
Resolder Connections
Sometimes, a bad solder joint is the issue. Reflowing the solder on all connections might solve the problem.
This is a long shot, but worth trying if you're comfortable with electronics.3. External Photo Cell
This involves bypassing the internal photo cell entirely.
Considerations
Safety First
Any electrical work should be done with the power OFF and proper safety precautions. If you are not comfortable working with electricity, hire a qualified electrician.
Aesthetics
Any modifications will likely change the look of the fixture. Consider how important the original appearance is to you.
Weatherproofing
If you modify the fixture, ensure it remains weatherproof to prevent damage and electrical hazards.*
Long-Term Viability: Consider how the modification might affect future repairs or replacements.Good luck! This is a challenging problem, but with some perseverance, you might find a solution. Flag for review