Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Lutron dimmer at 4 way location

User: electrofelon, Location: Cherry Valley NY, Seattle, WA

Asked on: Saturday, November 1, 2025 at 5:52 pm EDT
Answered on: Saturday, November 1, 2025 at 5:53 pm EDT

Question: What product(s) do i need to put a diva dimmer at the 4 way location of a 3-4-3?A Man A plan A canal Panama

Okay, let's break down what you need for a Diva dimmer in a 3-4-3 wiring configuration.

Understanding the 3-4-3 Configuration This means you have three switches controlling one light fixture. The first switch is a 3-way, the second switch is a 4-way, and the third switch is a 3-way.

Diva Dimmer Compatibility Most Diva dimmers are not directly compatible with 4-way circuits when used as the main dimmer controlling the load. They are designed to be at the beginning of the circuit as the main dimmer. You'll need a Diva dimmer designed for use with multi-location dimming. Lutron calls these "companion dimmers" or "accessory dimmers."What You Need (Recommended Solution)1. Main Diva Dimmer (at a 3-way location)

You'll need a Diva dimmer specifically designed to work in a multi-location dimming setup. Look for one that is compatible with companion dimmers. Lutron's DVCL-153P is a very common example.2.

Companion Dimmer (at the 4-way location and the remaining 3-way location)

You'll need two companion dimmers. These are designed to work with the main Diva dimmer and allow you to dim the light from all three locations. Lutron's DVCL-153P-WH is a companion dimmer that is compatible with the DVCL-153P main dimmer.

How it Works (Simplified)
The main Diva dimmer (e.g., DVCL-153P) is installed at one of the 3-way switch locations. It controls the power to the light. The companion dimmers (e.g., DVCL-153P-WH) are installed at the other switch locations (the 4-way and the other 3-way). They send signals to the main dimmer to tell it to adjust the light level. The wiring is different than standard 3-way/4-way wiring. The companion dimmers require a neutral wire connection and a communication wire to the main dimmer.

Important Notes
Neutral Wire

Make sure you have a neutral wire available at each switch location where you're installing a companion dimmer. If you don't have a neutral, you may need to run new wiring.

Wiring Diagram

Carefully follow the wiring diagram that comes with the Lutron Diva dimmer and companion dimmers. Multi-location dimming wiring can be complex, and incorrect wiring can damage the dimmer or create a safety hazard.

Professional Installation

If you're not comfortable working with electrical wiring, it's best to hire a qualified electrician to install the dimmers.

Compatibility

Double-check the Lutron website or product documentation to ensure the Diva dimmer and companion dimmers you choose are compatible with each other.


Location

The Lutron Maestro companion dimmer can be placed at either of the switch locations on the multi-way switch.

In summary, you need



One Diva Dimmer (designed for multi-location dimming)
to replace a 3-way switch. Two Companion Dimmers to replace the remaining 4-way and 3-way switches. Ensure you have neutral wires at each switch location and carefully follow the wiring diagrams.Disclaimer: I am an AI chatbot and cannot provide electrical advice. Always consult with a qualified electrician for electrical work.* Flag for review

Previous Question Next Question