User: jmellc, Location: Durham, NC
Asked on: Sunday, November 2, 2025 at 1:11 pm EST
Answered on: Monday, November 3, 2025 at 1:13 am EST
Question: Someone sent me this pic of terminations on a Premier brand range. Never heard of the brand before. Looks to me like the neutral is missing from the terminal strip. I never saw a range without a visible neutral wire to center. Friend said he connected neutral from cord to center & pulled the bonding strap as I said do, green to chassis ground. Worked fine. Factory must have neutral terminated internally. I haven’t connected a range in over 5 years now. Has that become common?
You're right to be cautious. Here's a breakdown of what's likely happening and what to consider
What's Likely Going On
Internal Neutral Termination
You are correct in suspecting that the neutral is terminated internally within the range. Many modern appliances, particularly ranges designed for both 120V and 240V operation, are wired this way. The 120V circuits (lights, timers, some controls) require the neutral, while the 240V heating elements do not. The neutral is internally split and distributed where needed.
Cost Savings
By not extending the neutral to the external terminal block, the manufacturer saves a little bit of copper wire and a connection point.
Modern Design
With increased focus on energy efficiency and simpler designs, manufacturers might opt for internal neutral connections to optimize the appliance's internal wiring.
Important Considerations Your Friend's Solution
Connecting the neutral wire from the cord to the center terminal block position and removing the bonding strap (green to chassis) should be the correct way to connect the range in a standard residential setup.
Confirm the Model Number
The most important step is to get the
exact model number of the range. This is crucial for finding the installation manual. Installation Manual
The installation manual is your Bible! It will specifically state how to connect the range to a 3-wire or 4-wire power cord. Look for a wiring diagram.
Check the Jumper
There will be a bonding jumper (usually a metal strap or a wire) that connects the neutral terminal to the chassis (the metal frame of the range). For 4-wire service, this jumper must be removed. This is what your friend did.
4-Wire vs. 3-Wire Service
4-Wire (Modern Code Compliant)
Separate neutral and ground. This is now generally required for new installations. The ground wire from the cord goes to the chassis ground screw, and the neutral goes to the neutral terminal. The bonding jumper between neutral and chassis is removed.
3-Wire (Older Installations)
The neutral and ground are combined. This is often found in older homes. In this case, the neutral from the cord goes to the center terminal, and the bonding jumper remains in place to bond the neutral to the chassis.
Safety First
If there's any doubt, consult a qualified electrician. Incorrect wiring can be dangerous and potentially cause a fire or electric shock.
In summary: Your suspicion is likely correct. The internal neutral connection is becoming more common. The key is to get the model number and consult the installation manual. Follow the instructions exactly* for your type of electrical service (3-wire or 4-wire). If you're not comfortable, get a licensed electrician. Flag for review