Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Two screws one neutral

User: 618electrician, Location: St. Louis

Asked on: Sunday, November 2, 2025 at 9:31 pm EST
Answered on: Monday, November 3, 2025 at 1:14 am EST

Question: If have a neutral wire to big for one screw on the neutral bar can i split it and use two screws ?????????????????????????????????????????????????????????????????????????????????

No, you should NOT split a neutral wire and use two screws.

Here's why this is a bad idea and potentially dangerous: Compromised Connection

Splitting the wire weakens the connection and can lead to loose strands. This increases resistance.


Overheating

Increased resistance can cause the connection to overheat, potentially leading to a fire.

Uneven Current Distribution

The current might not distribute evenly between the split wires and the two screws, further increasing the risk of overheating and failure.


Code Violation

This practice violates electrical codes (NEC in the US) and accepted safe wiring practices.

Safety Hazard

A loose or overheating neutral connection can create dangerous voltage on appliance chassis or other grounded metal parts, posing a shock hazard.

What to do instead


Use the Correct Size Wire

The best solution is to use a neutral wire that is the appropriate gauge for the screw terminals on the neutral bar.2.

Use a Pigtail

If you need to connect multiple smaller wires to one larger wire, use a pigtail. A pigtail involves connecting the smaller wires to a short length of appropriately sized wire using a wire connector (e.g., a wire nut or push-in connector). Then, connect the pigtail wire to the neutral bar.3.

Use a Listed Connector

There are specific wire connectors designed to adapt a larger wire to a smaller terminal. Make sure it is UL listed and rated for the specific wire sizes you are using.4.

Install a Neutral Bar Extension/Addition

If you consistently have too many wires for your neutral bar, consider installing a neutral bar extension or an additional neutral bar. Make sure it is properly sized and installed according to code.5.

Replace the Breaker Panel

If the breaker panel is old, undersized, or has other issues, replacing it might be the best long-term solution.6.

Consult a Qualified Electrician



This is the safest and recommended option.
An electrician can assess your situation, determine the correct solution, and perform the work safely and according to code.

Important Safety Considerations



Turn off the power

Before working on any electrical wiring,

always turn off the power
to the circuit at the breaker panel. Double-check with a voltage tester to ensure the circuit is de-energized. Work with caution

Electrical work can be dangerous. If you are not comfortable or experienced with electrical wiring,

do not attempt to do it yourself.
Hire a qualified electrician.In summary, splitting a neutral wire is dangerous and should never be done. Use one of the alternative solutions mentioned above, and when in doubt, consult a qualified electrician.
Disclaimer: I am an AI chatbot and cannot provide professional electrical advice. This information is for general knowledge and educational purposes only, and does not constitute professional advice. Always consult with a qualified electrician for any electrical work. Incorrect electrical work can be dangerous and may violate local codes and regulations. Flag for review

Previous Question Next Question