User: 618electrician, Location: St. Louis
Asked on: Wednesday, November 5, 2025 at 6:29 pm EST
Answered on: Wednesday, November 5, 2025 at 6:30 pm EST
Question: how many and where and where not . 2017 nec ?????????????????????????????????????????????????????????????????????????????????????????
Okay, I'll address your question about the 2017 National Electrical Code (NEC), focusing on the "how many and where and where not" aspects, though it's a very broad topic. I'll provide a general overview. A precise answer would depend on the specific electrical situation you're asking about.
Understanding the Core Concepts
The NEC is a comprehensive set of rules and guidelines designed to ensure safe electrical installations. It's not a law itself, but it's often adopted by states, counties, and municipalities as the legal standard for electrical work."How Many"
This question can refer to several things: Number of Outlets/Receptacles
The NEC specifies rules about the number of receptacles required in various locations (e.g., dwelling units, kitchens, bathrooms). For example, in dwelling units, receptacles must be placed so that no point along the floor line of any wall space is more than 6 feet, measured horizontally, from an outlet in that space.
Number of Circuits
The NEC mandates the number of circuits needed for specific loads (e.g., small appliance branch circuits, lighting circuits). For example, dwelling units must have at least two 20-ampere small appliance branch circuits.
Number of Conductors
The NEC dictates how many conductors can be run in a conduit or raceway, based on factors like wire size, insulation type, and conduit fill capacity.
Ampacity/Overcurrent Protection
The NEC provides tables and rules to determine the ampacity (current-carrying capacity) of conductors and the appropriate size of overcurrent protection (circuit breakers or fuses).
"Where"
This question refers to the locations where specific electrical installations are required or permitted. General Use Receptacle Requirements
The NEC dictates where receptacles are required in dwelling units (e.g., kitchens, bathrooms, living rooms, bedrooms, hallways).
GFCI Protection
The NEC specifies locations where ground-fault circuit interrupter (GFCI) protection is mandatory (e.g., bathrooms, kitchens, garages, outdoors, crawl spaces).
AFCI Protection
The NEC specifies where arc-fault circuit interrupter (AFCI) protection is required (e.g., bedrooms, living rooms, dining rooms).
Wiring Methods
The NEC outlines permissible wiring methods (e.g., NM cable, conduit) for different locations and applications.
"Where Not"
This indicates where specific electrical installations are prohibited or restricted. Wiring Methods
Certain wiring methods are not permitted in specific locations due to environmental factors or safety concerns (e.g., NM cable in damp or wet locations).
Equipment Locations
The NEC restricts the placement of electrical equipment near flammable materials or in hazardous (classified) locations.
Prohibited Connections
The NEC prohibits certain types of electrical connections or splices in specific areas.
Clearance Requirements
The NEC dictates minimum clearance requirements around electrical equipment for safety and accessibility.
Key NEC Articles Relevant to These Questions (2017 NEC)
Article 210: Branch Circuits
Covers branch-circuit requirements, including the number of circuits, receptacle spacing, and circuit ratings.
Article 220: Load Calculations
Provides methods for calculating the electrical load of a building or installation.
Article 230: Services
Covers service entrances and equipment.
Article 250: Grounding and Bonding
Deals with grounding and bonding requirements for electrical systems.
Article 300: Wiring Methods
General requirements for wiring methods.
Article 406: Receptacles, Cord Connectors, and Attachment Plugs (Caps)
Covers receptacle requirements, including GFCI protection.
Article 547: Agricultural Buildings
Contains specific rules for electrical installations in agricultural buildings.
Important Considerations
Local Amendments
Many jurisdictions amend the NEC to suit their specific needs or regulations. Always check with your local electrical inspector to confirm which edition of the NEC is in effect and if any local amendments apply.
Qualified Electrician
Electrical work should be performed by a qualified and licensed electrician. The NEC is complex, and improper installations can be dangerous and violate building codes.
Specific Application
The "how many, where, and where not" will vary depending on the type of building (dwelling unit, commercial building, industrial facility), the specific area within the building, and the type of electrical equipment involved.
Example Scenarios
How many receptacles in a kitchen? The NEC requires receptacles to be placed so that no point along the countertop is more than 24 inches from a receptacle. Small appliance circuits are also required. Where is GFCI protection required? GFCI protection is required in bathrooms, kitchens, garages, outdoors, crawl spaces, unfinished basements, and other locations where there is a risk of electric shock.* Where can NM cable be used? NM cable (Romex) can be used in dry locations within walls and ceilings. It cannot be used in wet or damp locations or underground.
In summary, to get a definitive answer to your questions, you need to provide specific details about the electrical situation you're dealing with. It's always best to consult the 2017 NEC and a qualified electrician for guidance on how to apply the code correctly. Flag for review