Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 2026 is out

User: Dennis Alwon, Location: Chapel Hill, NC

Asked on: Wednesday, November 5, 2025 at 6:42 pm EST
Answered on: Wednesday, November 5, 2025 at 6:42 pm EST

Question: The 2026 code is out and there are some structural changes. Here is a glimpse at Chapter 2 headings. Looks like they now have a different article for stuff over 1000 voltsChapter 2 — Wiring and Protection​Article 200 Use and Identification of Grounded Conductors​Article 206 Non-Power-Limited Remote-Control and Signaling Circuits​Article 210 Branch Circuits​Article 215 Feeders​Article 225 Outside Branch Circuits and Feeders​Article 230 Services​Article 240 Overcurrent Protection​Article 242 Overvoltage Protection​Article 245 Overcurrent Protection for Systems Rated Over 1000 Volts ac, 1500 Volts dc, Nominal​Article 250 Grounding and Bonding​Article 265 Branch Circuits Over 1000 Volts ac, 1500 Volts dc, Nominal​Article 266 Feeders Over 1000 Volts ac, 1500 Volts dc, Nominal​Article 267 Outside Branch Circuits and Feeders Over 1000 Volts ac, 1500 Volts dc, Nominal​Article 268 Services Over 1000 Volts ac, 1500 Volts dc, Nominal​Article 270 Grounding and Bonding of Systems over 1000 Volts ac, 1500 Volts dc, Nominal​

This is a significant change in the 2026 NEC! Having dedicated articles for systems over 1000 volts AC and 1500 volts DC simplifies the code and makes it easier to find relevant information for high-voltage installations. Here's a breakdown of why this change is important and what it likely entails

Key Implications of This Change:
Increased Clarity

By separating the requirements for high-voltage systems, the NEC avoids intermingling them with those for lower-voltage systems. This reduces ambiguity and makes it faster for electricians and engineers to find and apply the correct rules.


Specific Requirements

High-voltage systems have unique safety considerations and engineering challenges compared to lower-voltage systems. These dedicated articles likely address these differences in detail, covering topics such as:

Insulation and Clearances

More stringent requirements for insulation, conductor spacing, and working clearances around high-voltage equipment.


Overcurrent Protection

Specialized overcurrent protection devices and coordination requirements to handle the higher fault currents in high-voltage systems.

Grounding and Bonding

Different grounding and bonding methods to ensure proper fault current paths and minimize touch potential.


Equipment Standards

References to specific equipment standards (e.g., ANSI, IEEE) relevant to high-voltage installations.

Personal Protective Equipment (PPE)

Requirements for qualified personnel to use appropriate PPE when working on or near high-voltage equipment.


Improved Safety

The clearer and more specific requirements are likely to lead to safer installations and reduce the risk of electrical accidents in high-voltage systems.

Training and Education

Electricians and engineers working with high-voltage systems will need to be familiar with these new articles and the specific requirements they contain. This may lead to increased demand for specialized training programs.


Consistency

This change should bring more consistency to high-voltage installations across different jurisdictions.

Summary of the New Articles
Article 245

Overcurrent Protection for Systems Rated Over 1000 Volts ac, 1500 Volts dc, Nominal


Article 265

Branch Circuits Over 1000 Volts ac, 1500 Volts dc, Nominal

Article 266

Feeders Over 1000 Volts ac, 1500 Volts dc, Nominal


Article 267

Outside Branch Circuits and Feeders Over 1000 Volts ac, 1500 Volts dc, Nominal

Article 268

Services Over 1000 Volts ac, 1500 Volts dc, Nominal


Article 270

Grounding and Bonding of Systems over 1000 Volts ac, 1500 Volts dc, Nominal

Overall, this restructuring of Chapter 2 is a positive development for the NEC. It will make the code easier to use and understand, and it should contribute to safer high-voltage electrical installations.
Flag for review

Previous Question Next Question