User: blueheels2, Location: Raleigh, NC
Asked on: Thursday, November 6, 2025 at 10:18 am EST
Answered on: Thursday, November 6, 2025 at 10:19 am EST
Question: Will 4/0 SEU fit in an 1.5” cable clamp or does it need a 2”? No supply house in my area has any in stock for me to test the clamps on. I’ve got to drill holes for 2 in a tight spot and the smaller ones would be better.
While I can't give you a definitive "yes" or "no" without knowing the exact dimensions of the 4/0 SEU cable and the specific cable clamp you're considering, here's how to figure it out and what to consider
1. Find the Cable Diameter:
Manufacturer's Specs
This is the most important step. Look up the specific 4/0 SEU cable you are using on the manufacturer's website (Southwire, Cerro, etc.). They will provide the overall diameter of the cable. This is usually given in inches. If you don't know the manufacturer, it might be printed on the cable itself.
Example
A quick search on Southwire's site for "4/0 SEU" shows diameters typically between 0.75 and 0.9 inches. This is just an example, you need to check the brand/type you actually have.
2. Find the Clamp's Opening Size
Clamp Label or Packaging
The cable clamp packaging or the clamp itself (sometimes stamped on the clamp body) should indicate the size of cable it's designed to hold. This may be a range (e.g., 0.6" - 0.9").
Manufacturer's Specs
Check the cable clamp manufacturer's website or catalog. They will provide the allowable cable diameter range.
3. Compare and Consider Slack
Does the cable diameter fit within the clamp's range? If the maximum cable diameter is less than the maximum size the clamp is designed for, then theoretically it should fit. Important: Allow for Some Slack. It's generally best to not force the cable into a clamp that's exactly the same size as the cable diameter. You want a little bit of play. This makes installation easier and prevents stressing the cable insulation. A clamp that's slightly larger than the cable is often preferred.
Rules of Thumb and Considerations
4/0 SEU is a thick cable. It's likely that a 1.5" cable clamp will be too small, especially if you have a thicker-than-average 4/0 SEU. Overfilling a clamp is dangerous. Squeezing the cable too tightly can damage the insulation, leading to potential shorts, ground faults, and fire hazards. Material matters. Plastic cable clamps might have more give than metal ones, but metal ones are usually stronger and more durable. NEC (National Electrical Code)
The NEC requires that cable clamps be properly sized and installed.
Recommendation
Absolutely get the specific cable diameter from the manufacturer. This is crucial.2. If the cable diameter is close to or exceeds the 1.5" clamp opening, use the 2" clamp. It's better to be safe and have a little extra room.3. If possible, find a local supplier who can let you test a small piece of cable in the clamps. This is the best way to be sure. Even if they only have short pieces for scrap, it can give you an idea.4. If you absolutely have to order the clamps before testing, and space is a huge constraint, order one of each size. When the cable arrives, test both clamps. Return the one that doesn't fit. This adds a little cost and hassle, but it's better than drilling all the wrong size holes.
Important Safety Note: Working with electrical wiring can be dangerous. If you are not experienced and qualified, consult a licensed electrician. Flag for review