User: Grouch, Location: New York, NY
Asked on: Friday, November 7, 2025 at 12:00 am EST
Answered on: Friday, November 7, 2025 at 12:09 am EST
Question: What type of wire is the white wire in the attached picture? it seems to be crimped / flattened. Is it allowed to be used in temp or permanent installations?
I am unable to view attachments, so I cannot tell you the type of wire in the picture.However, I can give you some general information
Possible types of wire:
Solid Wire
A single, solid strand of metal.
Stranded Wire
Multiple thin strands of metal twisted together. This is more flexible than solid wire.
Hook-up Wire
Used in electronics and internal wiring of devices.
Appliance Wire
Used for internal wiring of appliances.
Fixture Wire
Used for wiring light fixtures.
Regarding the flattened/crimped appearance
The flattened or crimped appearance suggests that the wire might have been:
Damaged
It could be mechanically damaged, which might compromise its insulation and current-carrying capacity.
Crimped for a connection
It might be specifically designed for use in a crimp connector. Some wires are flattened at the end to ensure good contact with the connector.
Legality for temporary or permanent installations
It's impossible to say for sure if the wire is allowed for temporary or permanent installations without knowing the wire type and why it's flattened. But the following is important:
Never use damaged wire: If the wire is damaged, do not use it! Codes and Regulations
Electrical work must adhere to local electrical codes (like the National Electrical Code (NEC) in the US). These codes specify the types of wire permitted for various applications and installation methods.
Voltage and Amperage Ratings
Any wire used MUST be rated for the voltage and amperage requirements of the circuit it will be used in. Using an under-rated wire is a fire hazard.*
Proper Installation
Wires must be installed correctly, including proper connections, strain relief, and protection from physical damage.
To determine if the wire is safe and code-compliant, you would need to
Identify the wire type
Look for markings on the wire's insulation that indicate its type, voltage rating, and other specifications.2.
Determine the purpose of the crimp
Was it a factory-made connector, or a homemade attempt?3.
Consult the local electrical code
Check your local electrical codes to see if the wire is permitted for the intended application. If you're not familiar with the codes, consult with a qualified electrician.4.
Assess the condition
Look for any signs of damage to the insulation or the conductor. If the wire is damaged, it should not be used.
In general, if you are unsure about the type or condition of a wire, it is always best to consult with a qualified electrician before using it. Electrical work can be dangerous, and it is important to ensure that all work is done safely and correctly. Flag for review