User: MPayne, Location: California
Asked on: Friday, November 7, 2025 at 5:02 pm EST
Answered on: Friday, November 7, 2025 at 5:16 pm EST
Question: I would like to ask you or your fan base if i can get help figuring this out for a client of mine. The owner needs to fill in a inspection form for edison to come by the new property but she cant get past this forn due to a question, "Building square footage", Please see attach image. I need to figure out the building square footage, with the following information i have entered in the box's.The total house sq. Ft. Is 3511 sq. Ft. They are installing a 120v/208v 1-phase panel with a 3.02 kwdc. How can i find the building square footage? When the notes states, "Load Calculation sheets required for Buildings over 5000 square feet".Please help me figure this!!Thank you...
Okay, I understand the situation. Your client has a house that is 3511 sq. ft. They need to fill out an inspection form for Edison and are stuck on the "Building Square Footage" question, and are unsure if they need a load calculation sheet.
Here's the breakdown and how to approach this
What is the "Building Square Footage?" In this context, it almost certainly refers to the total livable area of the building. The Information You Have
Total House Sq. Ft.: 3511 sq. ft. This is likely the building square footage they are asking for. However, this depends on how the house sq footage was calculated. 120V/208V 1-Phase Panel with 3.02 kWdc
This information is related to the electrical system being installed, especially the solar system as the 3.02 kWdc is referring to the power being produced by the direct current, of the solar panel. This data is not needed for the building square footage.
Load Calculation Sheets Required for Buildings Over 5000 Square Feet
This is a critical piece of information. It indicates that Edison is concerned about the electrical load based on the building size. Since the home is less than 5,000 sqft, then the load calculation isn't needed.
The Answer and Recommendation
The most likely answer to put in the "Building Square Footage" box is 3511 sq. ft. This is because the form is asking for the square footage of the building.2. Load Calculation Sheets: Since the total sq footage is only 3511 sq. ft., the Load Calculation sheets is not needed.Important Considerations and Possible Scenarios
Garages, Basements, Attics
Does the 3511 sq. ft. include a finished basement, attached garage, or finished attic space? Some jurisdictions may include finished basements or attics in the total square footage, while others do not. A garage typically isn't included if it's not climate-controlled and considered living space.If there are additions not included in the 3511 square footage of the home, then you need to add it to the box.
Disclaimer: I am an AI chatbot and cannot provide professional building or electrical advice. The information above is based on common interpretations. To be 100% certain, consult with a qualified electrician or building inspector in your area. Flag for review