Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Camera wiring - future proof

User: marmathsen, Location: Seattle, Washington ...ish

Asked on: Friday, November 7, 2025 at 11:48 pm EST
Answered on: Friday, November 7, 2025 at 11:49 pm EST

Question: The recent doorbell wiring thread got me thinking, what do others do to future proof for cameras. Is Cat6 good enough and assume POE or do you also run 18/2 (or Siamese)? How often is the 18/2 actually used?Rob GSeattle

That's a great question, Rob! Thinking about future-proofing for security cameras is a smart move. Here's a breakdown of the considerations and popular approaches, along with a look at the practicality of 18/2 wiring

Considerations for Future-Proofing Camera Wiring:
Power over Ethernet (PoE) Dominance

PoE is now the standard for most modern IP cameras. It simplifies installation, reduces the need for separate power outlets, and allows for remote restarting of the camera.


Camera Types



IP Cameras (PoE or WiFi)

The most common type, using network connectivity.


Analog Cameras (Rarely Used)

Use coaxial cable (like RG59) and separate power. Generally, you don't want to future-proof for these.

Wireless/WiFi Cameras

While seemingly convenient, they can be less reliable due to WiFi interference and potential security vulnerabilities. Hardwiring (even with WiFi cameras) is often a more reliable long-term solution.


Resolution & Bandwidth

Higher resolution cameras (4K and beyond) require more bandwidth. Choose cable that can handle your projected bandwidth needs.

Distance

Longer cable runs require higher quality cable to maintain signal strength and PoE voltage.


Cable Routing

Consider the difficulty of running new cable later. Is it through walls, attics, crawl spaces, or buried underground? Plan accordingly.

Budget

Factor in the cost of the cable, connectors, tools, and installation time.


Longevity

How long do you plan on living in the house, and how far into the future are you trying to future-proof?

Strategies for Future-Proofing


Cat6/Cat6A with PoE



Pros



Excellent Data Transfer

Cat6/Cat6A provides ample bandwidth for even high-resolution 4K cameras and beyond.

PoE Support

Designed to deliver power, eliminating the need for separate power wires.


Future-Proofing

Cat6/Cat6A is likely to remain relevant for a considerable time. Cat6A is especially good for longer runs and higher bandwidth.

Versatility

Can be used for other networking purposes in the future (e.g., wired access points).


Cons



Cost

Cat6/Cat6A is generally more expensive than lower-grade cables.


Termination

Requires more care and potentially specialized tools for proper termination.

Recommendation

This is the

most common and recommended approach
for new installations.2. Cat5e with PoE (Acceptable, but not ideal)



Pros



Lower Cost

Less expensive than Cat6/Cat6A.


PoE Support

Can still deliver power.

Cons



Lower Bandwidth

May become a bottleneck with future higher-resolution cameras.

Shorter Distance

More susceptible to signal degradation over longer distances.


Recommendation

Acceptable if you already have it installed, but for new installations,

choose Cat6/Cat6A.
3. Siamese Cable (Rarely Recommended for IP Cameras)



What it is

A cable combining a coaxial cable (for video) and power wires (typically 18/2).


Pros



Simplicity for Analog Systems

Used to be common for analog CCTV systems.


Cons



Outdated Technology

Analog cameras are becoming obsolete.


Limited Usefulness

Not ideal for IP cameras, which are the future.

Bulky

More difficult to run and terminate.


Recommendation



Avoid
using Siamese cable for new camera installations unless you specifically need to support an older analog system (which is unlikely).4. Running Conduit



Pros



Ultimate Future-Proofing

Allows you to easily pull new cables later as technology evolves.

Protection

Protects cables from physical damage and environmental factors.


Cons



Cost

Adds to the overall expense.


Complexity

Requires more planning and installation effort.

Recommendation

Highly recommended if you're doing significant renovations or new construction. Even if you run Cat6 now, you can easily upgrade to fiber optics in the future if needed.

How Often is 18/2 Actually Used?
Rarely in Modern IP Camera Systems

With the prevalence of PoE, 18/2 is becoming increasingly uncommon for powering cameras directly.

Exceptions



Specialized Cameras

Some cameras, especially PTZ (Pan-Tilt-Zoom) cameras with high power requirements, might still require separate power. Even then, PoE++ (802.3bt) is becoming more common and can handle higher power demands.

Long Cable Runs

In extremely long runs where PoE voltage drop becomes a problem, you
might consider using a local power supply at the camera location and running 18/2. However, PoE extenders are generally a better solution.

Retrofitting Existing Systems

If you're replacing older analog cameras and already have 18/2 in place, you could repurpose it for powering IP cameras, but it's often better to run new Cat6/Cat6A and use PoE.

Recommendations



Primary

Run Cat6 or Cat6A cable to each camera location. Terminate with RJ45 connectors.


Secondary (If you really want to future-proof)

Consider running conduit alongside the Cat6/Cat6A.

Don't Bother

Avoid running 18/2 unless you have a specific and compelling reason (e.g., powering a non-PoE camera, repurposing existing wiring).

Important Considerations



Cable Quality

Use high-quality, solid-core Cat6/Cat6A cable from a reputable manufacturer. Avoid CCA (Copper Clad Aluminum) cable, as it's less reliable and doesn't conduct power as well.

PoE Switch

Invest in a good quality PoE switch with sufficient power budget to support all your cameras. Factor in future expansion.


Professional Installation

If you're not comfortable running and terminating network cable, consider hiring a professional installer. Proper termination is crucial for optimal performance.*

Testing

After installation, test each cable run to ensure it meets the Cat6/Cat6A standards.

In summary:
For almost all modern IP camera installations, focusing on Cat6/Cat6A with PoE is the best way to future-proof your home security system. The 18/2 wiring is becoming increasingly obsolete in this context. Flag for review

Previous Question Next Question