Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Temp Load Calc

User: Alwayslearningelec, Location: NJ

Asked on: Thursday, November 13, 2025 at 11:48 am EST
Answered on: Thursday, November 13, 2025 at 12:11 pm EST

Question: I came across this sheet for SOME temps loads. Point is it seems like a good way to calculate loads. I guess Kva is the way to go then convert into amps.What is duty cycle? Actual load?

You're right, using kVA for load calculations is often a good approach, especially when dealing with mixed loads (lighting, motors, heating, etc.) because it accounts for both the voltage and the current, along with the power factor. Converting kVA to amps is straightforward once you have the kVA value.Let's break down "duty cycle" and "actual load" in the context of electrical load calculations

Duty Cycle
Definition

Duty cycle is the percentage of time a piece of equipment is operating at its full rated load over a specific period (usually an hour). It represents how "hard" the equipment is working, and for how long.


Importance

Duty cycle is crucial because many pieces of equipment, particularly motors and heating elements, don't run at their maximum rated capacity all the time. If you simply add up the full-load kVA of every device, you'll likely overestimate the total load on the circuit, feeder, or service. This can lead to unnecessary expense in equipment sizing and increased installation costs.

Example

A motor rated at 10 kVA might only be used to lift a light load for 15 minutes of every hour. If used for 15 minutes out of every hour that's 15/60 or 25% duty cycle. The equipment might only be operated for 15 minutes out of an hour at a constant rate. So for 15 minutes of operation the duty cycle is only 25%.


Determining Duty Cycle

Duty cycle information can sometimes be found: In the equipment's specifications or nameplate. By monitoring the equipment's actual operating pattern over time. By interviewing the equipment operator or process manager. Using engineering judgment based on the application.

Actual Load
Definition

Actual load refers to the amount of power (in kVA or kW) that a piece of equipment is drawing at any given time. It's the
real power being consumed.

Relationship to Duty Cycle

The actual load is often calculated by applying the duty cycle to the equipment's rated load.

Formula

`Actual Load (kVA) = Rated Load (kVA) x Duty Cycle`


Example (Continuing from above)

If the 10 kVA motor has a 25% duty cycle, the actual load contribution for load calculations would be:`10 kVA 0.25 = 2.5 kVA`So, instead of adding 10 kVA to the overall load calculation, you would only add 2.5 kVA.

In Summary


Duty cycle and actual load are interconnected concepts. Duty cycle is the
time factor, while actual load is the power factor, they both contribute to the overall power consumed by an equipment. Actual Load is calculated considering the duty cycle. Using duty cycles in load calculations provides a more realistic and accurate estimation of the total electrical load.

Important Considerations
Worst-Case Scenario

While using duty cycles is generally accurate, you should also consider the worst-case scenario. What is the likelihood that multiple pieces of equipment with low duty cycles might all operate at full load simultaneously? Overlapping duty cycles can significantly increase the total load.

Code Requirements

Electrical codes like the NEC (National Electrical Code) in the US have specific rules for derating or applying demand factors to certain types of loads (e.g., motors, cooking equipment). These rules are designed to ensure adequate capacity while avoiding over-sizing. Be sure to consult the relevant code for your location.


Safety Factor:
It's good practice to include a safety factor in your load calculations to account for future load growth or unexpected variations.I hope this explanation helps! Let me know if you have any other questions. Flag for review

Previous Question Next Question