Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Shaft Work

User: Alwayslearningelec, Location: NJ

Asked on: Friday, November 14, 2025 at 10:16 am EST
Answered on: Friday, November 14, 2025 at 10:16 am EST

Question: GC said they will be building platforms in the shafts for us to run out large conduits. Is it more difficult to install work on platforms within shaft? Would think it would take longer.

Yes, installing conduits on platforms within shafts is generally more difficult and time-consuming than working in open areas. Here's a breakdown of the factors contributing to the increased difficulty: Limited Space

Shafts are inherently confined spaces. Platforms provide a level surface but further restrict movement and maneuvering. This can make it challenging to handle long or heavy conduit sections, especially when bending and fitting.


Accessibility

Accessing the platforms themselves can be an issue. You might need ladders, scaffolding, or personnel lifts to reach them. Moving materials and tools up and down the shaft adds complexity and time.

Working at Heights

Working on platforms means working at heights, which introduces safety concerns and the need for fall protection equipment. This can slow down the work pace.


Coordination

Coordinating with other trades working in the same shaft becomes more critical. The limited space requires careful planning to avoid interference and ensure everyone can work safely.

Ventilation

Depending on the depth and configuration of the shaft, ventilation might be limited, potentially leading to discomfort or safety hazards.


Lighting

Adequate lighting is essential for safe and efficient work. Shafts often require supplemental lighting to illuminate the work area effectively.

Why Platforms are Still Used

Despite the challenges, platforms are often used in shafts for a few key reasons:

Organization

Platforms provide a structured way to organize and support conduits, cables, and other utilities within the shaft.


Maintainability

Platforms allow for easier access to conduits for future maintenance, repairs, or upgrades.

Safety

While working at heights presents risks, platforms can make the work safer than trying to support conduits directly from the shaft walls or without a stable work surface.

Impact on Time

You're right to expect that installing conduits on platforms within shafts will likely take longer than installing them in more open environments. The increased difficulty and the factors mentioned above all contribute to a longer project duration.

Recommendations



Detailed Planning

Work with the GC and other trades to develop a detailed plan that addresses access, material handling, coordination, and safety.

Prefabrication

If possible, prefabricate conduit sections off-site to minimize the amount of work needed within the shaft.


Appropriate Equipment

Use the right tools and equipment for the job, including lifts, hoists, and specialized conduit benders.

Safety Measures

Implement strict safety protocols, including fall protection, ventilation, and lighting.


Communication:
Maintain open communication with the GC and other trades to address any issues that arise.In summary, while platforms in shafts provide structure and organization, they also introduce challenges that can make conduit installation more difficult and time-consuming. Careful planning, coordination, and attention to safety are essential for a successful project. Flag for review

Previous Question Next Question