Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Crazy offset for main feeder

User: Electric_kool_aid, Location: Washington

Asked on: Friday, November 14, 2025 at 12:23 pm EST
Answered on: Friday, November 14, 2025 at 12:24 pm EST

Question: So I have a strange situation, basically the customer ran the conduit himself, then hired me to finish the job. Obviously this is not how I would ever do this service especially with a building this nice I would have prefer to do a recessed meter and run the conduit before the slab got poured. But we do the best we can. He originally ran the conduit to the wrong spot and had to relocate it. Power company signed off on the conduit and the location. However he ran into footing at the new location so the conduit was 18” off the building. The only way I could make this work was to do this heinous offset. He’s ok with it but I’m worried this won’t pass inspection due to clearance concerns. But I didn’t really have any other options other than hammering the footing out which I don’t want to be liable for any of that. Would love some feedback.

Okay, I understand the situation. You've inherited a pre-existing conduit run, and the final location mandated by the power company is forcing a significant and, let's face it, unattractive offset. You're concerned about the aesthetics and potential code violations, but you've avoided structurally altering the footing. Here's my take, breaking it down

Concerns I See:
Aesthetics/Professional Reputation

You're right to be concerned. A large, visually prominent offset can reflect poorly on your workmanship, even if it was the only practical solution. A picture paints a thousand words, and this installation could be interpreted as sloppy.


Physical Damage Risk

The offset creates a potential point of impact for vehicles, lawn equipment, or even just foot traffic. It's now more vulnerable than a conduit snug to the wall.

NEC Clearance Issues

This is the biggest unknown. The NEC has many clearance rules, including working clearances around the meter, minimum heights above grade, and protection from physical damage.

Possible Code Concerns (Based on typical residential installations -
verify with your local codes!)



NEC 300.5(J)

This deals with protection from physical damage for underground conductors emerging from the ground. While this is technically not underground, inspectors could view the offset as a similar emerging point and require protection.

NEC 300.5(D)

This addresses the Minimum Cover Requirements, but looks like you are above ground.


NEC 110.26

While you are not doing work on electrical components, the fact that there is a large off set, the inspector could site the working space requirements and physical clearances needed for this meter.

What You Need to Do (In Order of Importance)


Know Your Local Codes and Inspector

Before doing anything else, speak with your local electrical inspector. Seriously. Explain the situation, describe the offset, and ask specifically what they'll be looking for. They may have specific local interpretations or amendments to the NEC that will dictate your next steps. This is the most important step to eliminate uncertainty.2.

Document Everything



Take Photos

Comprehensive photos of the existing conduit run, the footing obstruction, the completed offset, and the surrounding area are essential. Date-stamp them.


Get it in Writing (If Possible)

If the power company approved the location in writing, keep a copy for the inspector. Even an email is better than nothing.

Note the Footing

Document how you determined it was a footing and not just some buried debris. If you could see rebar or other structural elements, photograph those.


Document Your Efforts

Note that you explored alternative solutions (hammering out the footing) but avoided it due to liability concerns. The inspector will appreciate that you thought through this logically.3.

Mitigate the Offset

If you move forward with the install here are some things you can do to make the install better.

Physical Protection

The #1 risk is physical damage to the conduit. Here are some options, in order of preference:


Metal Sleeve/Guard

The best solution would be to encase the entire offset in a larger, heavy-gauge metal sleeve. This protects the conduit from impact and looks more professional. Bolt the sleeve to the building and the original conduit.

Schedule 80 PVC

If metal is not an option, replace the offset sections with Schedule 80 PVC conduit. This is much thicker and more impact-resistant than standard Schedule 40.


Concrete/Bollard

Encase the base of the offset in concrete or install a bollard near it to prevent vehicles from getting too close.

Secure the Conduit

Ensure the conduit is securely fastened to both the building and the meter base with appropriate straps and supports. Minimize any wobble or movement.


Paint

If it's PVC, paint it to match the building color to help it blend in.4.

Talk to the Customer



Manage Expectations

Be upfront with the customer about the aesthetics and potential for future problems. Explain the limitations you faced and the steps you've taken to mitigate the risks.


Consider Future Landscaping

Suggest landscaping options that could help conceal the offset (shrubs, etc.). The customer might be willing to invest in this to improve the appearance.

Worst-Case Scenarios & Solutions



The Inspector Fails It

If the inspector fails the installation, don't argue. Ask them
specifically what needs to be done to pass. Get it in writing if possible. Be prepared to make changes, even if they're costly.

The Customer is Unhappy Later

Make sure the customer understands the limitations of the installation and that you are not responsible for any damage to the conduit caused by external factors (vehicle impact, etc.). A signed agreement outlining this is a good idea.

Key Takeaways



Talk to the Inspector First

This is the most crucial step.


Document Everything

Protect yourself from liability.

Focus on Physical Protection

Mitigate the risk of damage to the conduit.


Manage Customer Expectations:
Be transparent about the limitations.This is a challenging situation, but by being proactive, communicative, and focusing on safety and code compliance, you can minimize the risks and ensure a professional outcome. Good luck! Flag for review

Previous Question Next Question