User: muchsnow, Location: SLC UT
Asked on: Friday, November 14, 2025 at 3:40 pm EST
Answered on: Friday, November 14, 2025 at 3:50 pm EST
Question: I have an issue where facility maintenance is checking gear and boxes with an IR thermometer rather than IR Scanning, iaw NFPA 70B (and required training/records). Once told I needed to mind my own business, I think I need to hammer this home with substance before continuing any more work there. What would be the most politically correct and orderly reference dialog to present this in that might kind of present or pressure the issue a bit more?... They've been signing off a LOT of annuals for quite some time. I see an entire rebase required, with/once qualified tech is in play, too. Makes sense to me.
Okay, this is a tricky situation. You're right to be concerned if facility maintenance is using IR thermometers for assessments that should be done with IR scanning according to NFPA 70B, especially if they're signing off on annual inspections. The potential for missed issues and safety risks is significant. However, approaching this directly after being told to "mind your own business" requires careful navigation. Here's a suggested approach that is politically correct, orderly, and emphasizes safety and compliance
1. Frame it as a Concern for Reliability and Safety (and then move to Compliance):
Initial Approach (after some time has passed since the initial "mind your own business" comment)
"Hi [Supervisor or relevant Manager's name], I wanted to follow up on our conversation about electrical equipment maintenance and inspections. I've been giving some thought to how we can optimize our maintenance practices to ensure the best reliability and safety for our electrical systems."
Next, Introduce the Concern Gently
"I've noticed that the current process involves using IR thermometers for thermal assessments. While spot checks with an IR thermometer are helpful for certain situations, I'm wondering if we're fully leveraging the benefits of infrared scanning (thermography) for comprehensive assessments, especially considering [mention specific equipment or area, e.g., 'main electrical panels' or 'critical motor control centers']."
2. Highlight the Benefits of IR Scanning (backed by NFPA)
Focus on early detection and prevention
"One of the key advantages of IR scanning, as outlined in NFPA 70B, is its ability to identify potential problems – like loose connections, overloaded circuits, or insulation degradation – early on, before they lead to equipment failure, downtime, or even safety hazards. This proactive approach can significantly reduce maintenance costs and improve overall system reliability."
Explain the difference in scope and detail
"IR thermometers provide a temperature reading at a specific point, whereas IR scanning provides a comprehensive thermal image of the entire component or system. This allows for a much more thorough evaluation and the identification of subtle temperature anomalies that might be missed with spot checks."
3. Subtly Introduce the Compliance Angle (NFPA 70B)
Frame it as a question of best practices and alignment
"I've been reviewing NFPA 70B (Recommended Practice for Electrical Equipment Maintenance) to ensure we're following best practices for electrical equipment maintenance. It emphasizes the importance of infrared thermography for predictive and preventive maintenance programs. I'm curious how our current practices align with these recommendations."
Focus on continuous improvement and safety
"Ultimately, my goal is to ensure that our electrical maintenance program is as effective and safe as possible. Implementing a robust IR scanning program, in accordance with NFPA 70B, could be a valuable step in achieving that goal."
4. Offer Solutions and Collaboration
Suggest a review of current practices
"Would you be open to a discussion with the relevant team about reviewing our current electrical maintenance procedures and comparing them to the recommendations in NFPA 70B? Perhaps we could identify areas where we could enhance our program through the implementation of IR scanning."
Offer to research qualified technicians/training
"I'd also be happy to research qualified thermographers or training programs that could help us implement a comprehensive IR scanning program. I think it's crucial that whoever is performing these assessments has the proper training and certifications to ensure accurate and reliable results."
5. Gently Address the Signed-Off Annuals (with utmost care)
Only bring this up after you've established a reasonable rapport and a focus on improvement. Frame it as a learning opportunity."In light of our discussion, and with the benefit of incorporating more comprehensive IR scanning, it might be prudent to review the documentation for past annual inspections. This wouldn't be about assigning blame, but rather about ensuring we have a solid baseline moving forward, and to identify any potential issues that might have been missed with the previous methodology. Perhaps we can engage a qualified thermographer to assist in this review."Important Considerations
Documentation is Key
Keep a record of your conversations, any documents you review (e.g., NFPA 70B), and any suggestions you make. This protects you if issues arise later.
Be Respectful and Collaborative
Even though you feel strongly about this, maintain a respectful and collaborative tone throughout your interactions. Avoid being accusatory or confrontational.
Focus on the "Why"
Emphasize the benefits of IR scanning in terms of safety, reliability, and cost savings. Connect it to the company's overall goals.
Know Your Audience
Tailor your approach to the specific individuals you're talking to. Some people respond better to data, while others are more motivated by safety concerns.
Be Patient
Changing ingrained practices can take time. Be persistent but patient in your efforts.
Escalation (If Necessary)
If you've made reasonable efforts to address the issue through these channels and haven't seen any progress, and you genuinely believe there's a significant safety risk, you may need to consider escalating your concerns to a higher level of management or to a regulatory agency (e.g., OSHA). Consult with legal counsel before taking this step.
Example Conversation Starters/Phrases: "I was reading about best practices for electrical maintenance, and it made me think about our current approach..." "I'm always looking for ways to improve our processes and ensure we're operating as safely as possible..." "What are your thoughts on the role of infrared thermography in our preventive maintenance program?"* "I'd be interested in learning more about the training requirements for performing infrared scans..."By focusing on the benefits of IR scanning, emphasizing compliance with NFPA 70B, and offering solutions, you can increase the likelihood of a positive outcome without directly confronting your colleagues or supervisor. Remember, safety is paramount, and you're doing the right thing by raising these concerns. Good luck! Flag for review