Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Meter - mounted transfer switches

User: 618electrician, Location: St. Louis

Asked on: Sunday, November 16, 2025 at 3:21 pm EST
Answered on: Sunday, November 16, 2025 at 3:22 pm EST

Question: Will the POWER CO in your area approve meter mounted transfer switches ? ( what is your opinion of them ) ?????????????????????????????????????????????????????????????????????????

Whether a power company approves meter-mounted transfer switches varies significantly depending on the utility and the local regulations. There is no single, universal answer to whether a power company will approve them.Factors influencing approval



Local Utility Policy

Each utility has its own policies regarding meter modifications and connections. Some explicitly allow meter-mounted transfer switches that meet specific requirements, while others strictly prohibit any modifications to the meter or meter socket.


National/Local Electrical Codes

Electrical codes (like the NEC in the US) have requirements for transfer switches, but local interpretations and amendments can affect what's allowed.

Safety Concerns

Utilities are concerned about backfeeding power onto the grid, which can be dangerous for line workers and damage equipment. They also worry about unqualified individuals tampering with the meter.


Liability

If something goes wrong due to a customer-installed modification, the utility could be held liable, so they often take a cautious approach.

Type of Transfer Switch

The specific design and certification of the transfer switch matter. A listed and labeled (UL, ETL, etc.) switch that meets utility interconnection standards is more likely to be approved than a DIY or uncertified setup. Automatic transfer switches are generally regarded as safer than manual ones.


Inspection and Permitting

Even if a utility allows meter-mounted switches in principle, they usually require a permit and inspection to ensure proper installation and compliance with safety regulations.

To find out if your local utility allows meter-mounted transfer switches, you must


Contact your local power company directly.
Call their customer service or engineering department and ask about their policy on meter-mounted transfer switches.2. Check local electrical codes and permitting requirements. Your city or county's building department will have information on electrical codes and permitting procedures.3. Consult with a licensed electrician. A qualified electrician in your area will be familiar with the local utility's policies and electrical codes.

My Opinion of Meter-Mounted Transfer Switches

My opinion is complex:

Potential Benefits (When Approved and Installed Correctly)



Cost Savings

Meter-mounted switches can potentially be cheaper to install than other types of transfer switches because they may require less wiring and conduit.


Convenience

They can be a convenient solution for homeowners who want a simple way to connect a generator during a power outage.

Space Saving

For some installations, they may require less physical space than a traditional transfer switch panel inside the house.

Potential Drawbacks and Concerns



Safety Issues

Improper installation or use can create serious safety hazards, including backfeeding the grid, electrical shock, and fire.

Utility Approval Challenges

As mentioned above, getting approval from the utility can be difficult or impossible.


Tampering Risks

Meter-mounted switches are more vulnerable to tampering than switches located inside the house.

Reliability

Exposure to the elements (weather, etc.) can potentially reduce the lifespan and reliability of the switch.


Difficult Installation

While potentially cheaper, installation can be tricky and must be done by a professional. Mistakes can be dangerous.

Code Compliance

Meter mounted transfer switches have to comply with strict NEC codes and often require special permits.

Overall

Meter-mounted transfer switches can be a viable option
if* they are permitted by the local utility, installed correctly by a qualified electrician, and meet all applicable safety standards and electrical codes. However, the potential risks and challenges associated with them mean that they are not always the best choice.

I strongly recommend consulting with a licensed electrician and contacting your local utility before considering a meter-mounted transfer switch.
They can provide specific guidance based on your situation and local regulations. Other types of transfer switches (e.g., those installed inside the house) may be a safer and more reliable alternative. Flag for review

Previous Question Next Question