User: jabschc, Location: Louisiana
Asked on: Monday, November 17, 2025 at 12:03 pm EST
Answered on: Monday, November 17, 2025 at 12:10 pm EST
Question: Hey guys, I'm doing a job and the homeowner is wanting all of the outside lights to come on with a switch in the bedroom for emergency reasons. The lights are for front porches back porches, floods, sconces, etc. In total about 7 led floods, 12 led wafers, and a few wall sconces, no real amp draw. They still want to control them independently (about 10-12 switches in total, 3 locations)for normal operations, but hit one switch in the bedroom in the event they need (security lighting). Just trying to see what product or best way to go about this. Was thinking of contactors with some kind of bypass or override. Thanks
Okay, this is a common request, and there are a few ways to tackle it. Contactors with an override are a solid option, but let's break down the pros and cons of each, and explore some other potentially better solutions depending on your budget and the homeowner's preferences.1. Contactors with Override Switch How it Works
You install a contactor (or multiple contactors) in your panel. The existing switch legs for the outdoor lights are wired through the normally open contacts of the contactor. The coil of the contactor is energized by a new circuit originating at the bedroom switch. When the bedroom switch is flipped, it energizes the contactor coil, closing the contacts and turning on all the lights. You also need a 'bypass' or 'override' mechanism so the lights can still be controlled by their local switches when the contactor isn't energized.
Pros
Relatively simple wiring (especially if you're familiar with contactors). Can handle a large load. Reliable.
Cons
Can be bulky and require more space in your panel(s). May need multiple contactors depending on how the existing lighting is wired and the physical space constraints in the panel. Requires running a new circuit to the bedroom switch. Finding the right contactor(s) can be tricky – you need to ensure it's rated for the load (which, with LEDs, is minimal but still needs consideration) and is suitable for the application. The "override" or "bypass" wiring requires careful planning and execution. It's often implemented with a 3-way switch wired in such a way that it allows the local switch to control the light when the contactor is not energized, but is bypassed when the contactor is energized.
Wiring Considerations (Override)
This is the most critical part. Here's the basic idea for a single light (remember, this would be repeated for each light circuit):1. Incoming hot (from panel) goes to one side of the local switch.
2. The other side of the local switch goes to one pole of a 3-way switch.3. The other pole of the 3-way switch goes to the load (light fixture).
4. The common (middle) terminal of the 3-way switch goes to one terminal of the contactor.5. The other terminal of the contactor goes to the load (same as step 3).In this way, when the contactor is OFF, the 3-way switch allows the local switch to control the light. When the contactor is ON, it bypasses the local switch and directly energizes the light.
Important Note
Get a qualified electrician to help with this design and implementation, especially with the override wiring. Incorrect wiring can cause shorts, fire hazards, or malfunction.
2. Smart Lighting Systems (My Recommendation)
How it Works
This involves replacing the existing switches with smart switches that are part of a larger connected system (like Lutron Caseta, Philips Hue, Insteon, etc.). The system is then programmed to respond to a "scene" activated by the bedroom switch.
Pros
Flexibility
You can easily reprogram the system to control different lights or change the behavior. Homeowners can also adjust settings themselves later.
Features
Many smart systems offer dimming, scheduling, geofencing, and integration with voice assistants (Alexa, Google Home, etc.).
No New Wiring (Potentially)
If you choose a system that uses existing wiring (like Lutron Caseta with its Pico remotes), you may not need to run new circuits to the bedroom. Some smart switches don't even require a neutral wire, which can simplify installation in older homes.
Clean Installation
Less clutter in the electrical panel compared to contactors.
App Control
Usually offers remote control via a smartphone app.
Cost-Effective
Depending on the number of lights, it can be surprisingly affordable. Consider the labor savings compared to running new circuits and wiring contactors.
Cons
Learning Curve
The homeowner needs to understand how to use the system (though most are user-friendly).
Reliance on Technology
If the hub goes down, the system may not function as expected. (Some systems offer local control even if the internet is down.)
Compatibility
Ensure the chosen system is compatible with the existing lighting fixtures.
Security Concerns
Like any connected device, there's a potential (though often small) security risk. Choose reputable brands with strong security practices.
Example Implementation (Lutron Caseta)
1. Replace each existing switch with a Lutron Caseta smart switch (or dimmer).
2. Install a Lutron Smart Bridge (hub).3. Wire a Lutron Pico remote to the wall in the bedroom. This Pico remote will act as your "emergency" switch.
4. Use the Lutron app to create a "scene" that turns on all the outdoor lights.5. Program the Pico remote button to activate that scene.
3. Low-Voltage Relay System
How it Works
Instead of using line-voltage contactors, you use low-voltage relays. The bedroom switch triggers a low-voltage circuit that energizes all the relays, which in turn switch the line voltage to the lights.
Pros
Safer to work with low-voltage wiring for the control circuit. Relays can be smaller than contactors.
Cons
Still requires panel space and wiring. More components involved (relays, power supply for the low-voltage circuit). Override wiring still needed, similar to the contactor approach.
4. Hybrid Approach: Smart Switches + Contactor
How it Works
Use smart switches for the individual controls, but instead of relying on the smart system to turn all the lights on for the emergency function, you use a smart switch (or a dedicated relay controlled by a smart hub) to trigger a single contactor that controls a "master" circuit feeding all the outdoor lights.
Pros
Combines the benefits of smart control with the reliability of a contactor for the emergency function. Reduces the load on the smart hub (it only has to control one switch/relay).
Cons
More complex to wire and configure. Requires both smart switch and contactor components.
Recommendations
My strongly preferred solution is a Smart Lighting System (like Lutron Caseta). It offers the most flexibility, features, and ease of installation (especially if you can use wireless remotes). It's also likely to be the most user-friendly for the homeowner in the long run. It's easy to expand and add features later.
If the homeowner is adamant about a "hard-wired" solution and doesn't want any "smart" technology, then the Contactor with Override approach is a viable option. Be prepared for more labor and a more complex wiring job. Make sure to use appropriately sized contactors and wire the override correctly.
Avoid the low-voltage relay system unless you have a specific reason to use it. It's generally more complex than the other options without offering significant advantages.
Important Considerations (Regardless of the Chosen Method)
Local Codes
Always comply with local electrical codes.
Neutral Wiring
Ensure the existing wiring includes a neutral wire at the switch locations (necessary for some smart switches).
Grounding
Proper grounding is essential for safety.
Load Calculation
Calculate the total load of the outdoor lights to ensure the chosen contactor, relays, or smart switches can handle it. While LEDs have low current draw, it's crucial to verify.
Surge Protection
Consider adding surge protection to protect the lights and the control system.
Homeowner Training
Provide clear instructions to the homeowner on how to use the system.
Before You Start
Thoroughly Inspect the Existing Wiring
Understand how the outdoor lights are currently wired (switch locations, circuits, wire gauges).2.
Discuss Budget with the Homeowner
Get a clear understanding of their budget so you can choose the most appropriate solution. Smart systems can range in price from very affordable to quite expensive, depending on the features and brand.3.
Sketch a Wiring Diagram
Create a detailed wiring diagram before you start any work. This will help you avoid mistakes and ensure a safe and reliable installation.4.
Consider Future Expansion
Will the homeowner want to add more lights or features in the future? Choose a system that can be easily expanded.5.
Consult an Electrician: If you are not 100% confident in your abilities, consult with a qualified electrician. Incorrect wiring can be dangerous.Good luck with the job! Let me know if you have any more questions. Flag for review