Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Jumper?

User: Alwayslearningelec, Location: NJ

Asked on: Tuesday, November 18, 2025 at 1:42 pm EST
Answered on: Tuesday, November 18, 2025 at 1:43 pm EST

Question: Is this copper wire some sort of bonding jumper? Is this required per NEC. Why would it be installed?

Okay, let's analyze the copper wire you're describing. Without seeing the wire directly or knowing its exact location and connections, I can only provide general possibilities based on your description and the NEC (National Electrical Code).

Likely Possibilities and Reasons for Installation

Given that you've identified the wire as copper, the most probable reasons for its existence, particularly in an electrical context, are related to bonding and grounding.1.

Equipment Bonding Jumper



Purpose

This is very likely. An equipment bonding jumper connects non-current-carrying metal parts of electrical equipment (enclosures, raceways, etc.) to the grounding system. This creates a low-impedance path for fault current to return to the source, allowing the overcurrent protective device (circuit breaker or fuse) to trip quickly, thus minimizing the risk of electrical shock or fire.


NEC Requirement

YES, generally REQUIRED by the NEC in many situations.

Article 250 (Grounding and Bonding)
contains the specific rules. Common examples: Bonding metal conduit to a metal box. Bonding a metal enclosure to a grounding electrode conductor. Bonding the neutral (grounded) conductor to the enclosure at the service entrance. Why Installed

To ensure a safe and effective path for fault current. It helps prevent voltage from appearing on metal parts that people could touch during a fault condition.2.

Grounding Electrode Conductor (GEC) or Jumper



Purpose

Connects the electrical system's grounded (neutral) conductor to a grounding electrode (like a ground rod, water pipe, or concrete-encased electrode). This establishes a connection to earth, stabilizing voltage and providing a path for fault current to dissipate. A
grounding electrode jumper is a wire that connects sections of a grounding electrode together, ensuring electrical continuity.

NEC Requirement

YES, REQUIRED.

Article 250
covers grounding electrode systems extensively. Why Installed

To provide a reference to earth for the electrical system and to help with fault current dissipation.3.

Supply-Side Bonding Jumper (SSBJ)
Purpose

This jumper connects the equipment grounding conductor (EGC) to the grounded (neutral) conductor on the supply side of the service disconnecting means.


NEC Requirement

YES, REQUIRED in Article 250.

Why Installed

This provides a low-impedance path for fault current to return to the source.4.

Other Bonding Applications



Metal Water Piping

NEC 250.104(A) generally requires bonding of interior metal water piping systems to the electrical grounding system.

Other Metal Structures

Bonding other metal structures within a building can help minimize potential differences and reduce the risk of shock.

Is it Required by the NEC?


Likely YES. The NEC is very specific about grounding and bonding requirements to ensure electrical safety. However, the exact rules depend on the specifics of the installation. Without knowing the exact situation, it is impossible to say definitively.

Why Would It Be Installed?
Safety

The primary reason for bonding and grounding is to protect people from electrical shock and prevent fires.

Code Compliance

Electrical installations must comply with the NEC and local electrical codes.


Proper System Function

Effective grounding and bonding are essential for the proper operation of electrical equipment and to minimize electrical noise.

To determine the exact purpose, you need to consider



Where is the wire located?
(e.g., inside an electrical panel, connecting two metal boxes, running along a water pipe, etc.) What is it connected to at each end? What size is the wire? What type of building/structure is this in (residential, commercial, industrial)?Important Safety Note: If you are not a qualified electrician, do not attempt to work on or modify electrical wiring. Improper wiring can be dangerous and potentially fatal. Consult with a licensed electrician for any electrical work or if you have questions about the safety of your electrical system.In summary, based on your description, the copper wire is most likely an equipment bonding jumper or related to the grounding system, and it is very likely required by the NEC to ensure safety. However, you need to examine the connections and location to confirm. Flag for review

Previous Question Next Question