User: PhaseShift, Location: Chapel Hill, NC
Asked on: Tuesday, February 1, 2011 at 1:30 pm EST
Answered on: Tuesday, May 14, 2024 at 1:01 am EDT
Question: Are most LV panelboards rated for 120/240V or are there some with a maximum rating of 120/208V? It seems like most 3-phase panelboards I have seen are have a 120/240V rating for the bus which are capable of being fed by a 208V 3-phase supply. I was just curious if there were panels rated at only 120/208V?
Yes, there are some LV panelboards with a maximum rating of 120/208V.While most LV panelboards are rated for 120/240V, some manufacturers may offer panelboards specifically designed for 120/208V systems. These panelboards may be labeled as "208V" or "120/208V" and are intended to be used only with a 208V 3-phase supply. The busbars and components within these panelboards are specifically designed to handle the lower voltage.Using a 120/208V panelboard with a 240V supply can be dangerous and may result in overheating, damage to equipment, and potential fire hazards. Therefore, it is important to choose the correct panelboard rating based on the voltage of the electrical supply. Flag for review