Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Class 1,2 and 3 in Article 700

User: boku0003, Location: Bremerton, Washington

Asked on: Tuesday, February 1, 2011 at 5:18 pm EST
Answered on: Tuesday, May 14, 2024 at 1:02 am EDT

Question: I am having a little trouble differentiating Class 1, 2 and 3 as far as voltage and power. At my work, I keep hearing that Class 2 is under 30 Volts and 100VA. I do not see this in the NEC though. So as far as Voltage and power, what is the difference between Class 1, 2 and 3?

Class 1 Voltage: Over 1000 Volts Power: Not specified in the NECClass 2 Voltage: Not more than 1000 Volts Power: Not more than 100VAClass 3 Voltage: Not more than 150 Volts Power: Not more than 10VAAdditional Notes: The voltage limits for Class 2 and Class 3 are sinusoidal RMS voltage. The power limit for Class 2 is based on the voltage and current output of the power supply. The power limit for Class 3 is based on the voltage and current of the load (device being powered). Class 2 and Class 3 circuits provide protection from electric shock through a combination of low voltage and limited power.* Class 1 circuits require the use of grounding and bonding to protect against electric shock. Flag for review

Previous Question Next Question