Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Digital Multimeter for resistance

User: EEC, Location: Maryland

Asked on: Wednesday, February 2, 2011 at 12:15 pm EST
Answered on: Tuesday, May 14, 2024 at 1:03 am EDT

Question: There are serveral ranges for ohms on the meter 200, 2K, 20K, 200K, 2M and 20M. When you get a read-out thats a decimal. What multiplier do you use to get the correct ohm reading?

To determine the correct multiplier for a decimal reading on an ohmmeter, you need to consider the range that was selected on the meter.For example, if you have a reading of 0.02 on the 200 Ω range, the multiplier would be 1/100. This is because the 200 Ω range means that the meter is expecting a reading between 0 and 200 ohms. A reading of 0.02 is 1/100 of 200, so the correct ohm reading is:0.02 x 100 = 2 ohmsHere's a table summarizing the multipliers for different ranges and decimal readings:| Range | Decimal Reading | Multiplier

---|---|---
200 Ω | 0.01 - 0.99 | 100
2K Ω | 0.001 - 0.999 | 1000
20K Ω | 0.0001 - 0.9999 | 10,000
200K Ω | 0.00001 - 0.99999 | 100,000
2M Ω | 0.000001 - 0.999999 | 1,000,000 || 20M Ω | 0.0000001 - 0.9999999 | 10,000,000 |It's important to note that some ohmmeters may have slightly different ranges and multipliers, so it's always best to refer to the specific manual for your meter. Flag for review

Previous Question Next Question