User: Bigrick31
Asked on: Wednesday, February 2, 2011 at 4:58 pm EST
Answered on: Tuesday, May 14, 2024 at 1:04 am EDT
Question: Let me first apologizes I am sure the answer to my question is located in the NEC however I cant for the life of me find my code book. Can someone tell me it is acceptable to install a 5Kva Transformer 115 deg C rise Rainproof enclosure type 3R on a wall in an attic away from any insulation? My main concern is that the attic reaches temperatures of 120 Deg F in the summer is this location too hot for the transformer? There attic does have a vent and is tall enough for a person to walk around so the transformer will have a good amount of room around it.
Acceptability of Transformer Installation
Yes, it is acceptable to install a 5kVA transformer with a 115 deg C rise in a rainproof enclosure (Type 3R) on a wall in an attic away from insulation.
Temperature Considerations
The NEC does not explicitly address the allowable operating temperature range for transformers in attics. However, transformer manufacturers typically provide temperature ratings for their products.According to the provided information, the transformer has a 115 deg C rise rating. This means that its internal temperature can be 115 deg C higher than the ambient temperature.Your attic reaches a maximum temperature of 120 deg F (49 deg C). Therefore, the internal temperature of the transformer would be around 169 deg F (76 deg C) [(120 deg F + 115 deg C) 9/5 = 168.8 deg F].This temperature is within the acceptable operating range for most transformers, which can typically handle temperatures of up to 180 deg F (82 deg C) or higher.
Additional Considerations Ventilation
Ensure that the attic has adequate ventilation to prevent heat buildup. The transformer should be placed where it will receive sufficient airflow.
Clearance
Maintain a clear space of at least 12 inches around the transformer for proper cooling and access.
Mounting
Mount the transformer securely to prevent vibration or movement.*
Grounding: Ensure that the transformer is properly grounded according to the manufacturer's instructions and the NEC. Flag for review