User: darylsama, Location: Chapel Hill, NC
Asked on: Wednesday, February 2, 2011 at 5:08 pm EST
Answered on: Tuesday, May 14, 2024 at 1:04 am EDT
Question: I would like to find out if the code has any limitations on the usage of Pool transformers such that, each underwater luminare must be connected by its own transformer? Assuming lamps are within the rated wattage.other than 680.23 (2), are there any other parts of the code that limits this use? if soo are there transformers that is actually maunufactured with this label (multiple lights)?im not sure why i should go through the expense with the advent of LEDS to buy multiple transformers for a pool with more than 1 fight fixture????
Limitations on the Usage of Pool Transformers
Yes, the National Electrical Code (NEC) limits the use of pool transformers such that each underwater luminare must be connected by its own transformer. This requirement is stated in NEC 680.23(2).
Other Code Sections
Other than NEC 680.23(2), there are no other sections of the code that specifically limit the use of multiple lights on a single transformer for underwater lighting. However, the general requirements for electrical installations in wet locations, such as pools, must be followed. These requirements include: All electrical equipment must be listed for use in wet locations. Wiring must be properly sized and protected from moisture. GFCIs must be installed on all circuits that supply power to underwater luminaries.
Multiple Lights on a Single Transformer
Transformers specifically manufactured for multiple lights are not readily available. It is generally not recommended to connect multiple lights to a single transformer, even if the total wattage is within the transformer's rating. This is because: Safety risk
If one light fails, it could overload the transformer and create a fire hazard.*
Performance issues
Multiple lights on a single transformer can lead to voltage drop, which can affect the light output and lifespan of the lamps.
LEDs and Pool Transformers
While LEDs are more efficient than traditional incandescent bulbs, they still require a transformer to convert the voltage from the power supply to the voltage required by the LED lamps. The transformer size will depend on the total wattage of the LED lamps being used.Since LEDs use less wattage than incandescent bulbs, it is possible to use a smaller transformer, which can save money on the initial installation cost. However, it is still important to use a transformer that is rated for the total wattage of the lamps being used.
Conclusion
To ensure the safety and performance of underwater lighting systems, it is recommended to follow the code requirement of using one transformer per underwater luminare. While it may be tempting to save money by using multiple lights on a single transformer, the potential safety risks and performance issues make it a poor choice for most applications. Flag for review