User: tom baker, Location: Bremerton, Washington
Asked on: Wednesday, February 2, 2011 at 11:25 pm EST
Answered on: Tuesday, May 14, 2024 at 1:05 am EDT
Question: Mike Holt and I need your help. We are having an email conversation with a major generator manufacturer whose installation instructions requires ground rods for any generator, including non SDS generators.AHJs then must follow 110.3(B) and require ground rods when the NEC does not.Inspectors - what issues does this cause with enforcement?Electricians - does this cause confusion, or just irritate you to drive ground rods when not needed?I will forward these comments to Mike and let you all know if we win on this.
Inspectors Challenges with Enforcement
Inconsistent interpretation of the NEC and local codes, leading to confusion and potential liability. AHJs may overrule the NEC, requiring ground rods for non-SDS generators even when not necessary. Inability to enforce the NEC consistently, as AHJ requirements may vary.
Additional Costs and Delays
Installing unnecessary ground rods can increase project costs and delay installations. Inspections may be delayed or failed due to the lack of ground rods when not required by the NEC.
Electricians Confusion and Frustration
Conflicting requirements between the NEC and AHJ interpretations can be confusing and frustrating for electricians. Installing ground rods unnecessarily can waste time and materials, especially for non-SDS generators.
Increased Costs
The cost of installing unnecessary ground rods can be passed on to customers, increasing the overall cost of the generator installation.
Safety Concerns
Improperly installed ground rods can create safety hazards if not done correctly. Electricians may be forced to make decisions about installing ground rods that could compromise safety.
Additional Considerations The NEC is generally based on sound engineering principles and should be followed unless there are specific local conditions that warrant deviations. Alternative grounding methods, such as using Ufer grounds or bonding to structural steel, may be more appropriate and effective than ground rods in certain situations. AHJs should work with inspectors and electricians to ensure consistent interpretation and enforcement of the NEC and local codes.* Manufacturer's instructions should be carefully reviewed to determine if ground rods are actually required. Flag for review