User: kentriolinda, Location: California
Asked on: Thursday, February 3, 2011 at 12:40 am EST
Answered on: Tuesday, May 14, 2024 at 1:05 am EDT
Question: I recently roughed in a small addition and installed a nonmetalic box for outdoor coach light and inspector said that i must have a bond to the box. I dont understand why I wuld need to bond a plastic box?
Explanation of Bonding Requirement for Nonmetallic Boxes
Bonding is required for nonmetallic electrical boxes because they do not inherently provide a path for electricity to flow to ground. Bonding ensures that any stray currents or fault currents are safely directed away from the box and back into the grounding system.
Why Bonding is Important for Outdoor Lighting Fixtures
Outdoor lighting fixtures are particularly susceptible to electrical hazards due to: Exposure to moisture and weather conditions Potential for contact with water or metal objects Increased likelihood of lightning strikesBenefits of Bonding Nonmetallic Boxes for Outdoor Fixtures
Bonding provides the following benefits: Safety
Creates a safe path for electricity to flow to ground, protecting against shocks and fires.
Code Compliance
Adheres to National Electrical Code (NEC) requirements for bonding nonmetallic boxes in outdoor locations.
Protection of Equipment
Directs fault currents away from the fixture, preventing damage or failure.
How to Bond a Nonmetallic Box
To bond a nonmetallic box for an outdoor light fixture: Use an approved bonding jumper (usually a green wire). Attach one end of the jumper to the bonding screw or lug on the box. Run the other end of the jumper to the grounding electrode system (GES) or to a metal conduit that is connected to the GES. Tighten all connections securely.
Note: Ensure that the bonding jumper is sized appropriately for the wire size used to connect the light fixture. Flag for review