User: mull982, Location: Wisconsin
Asked on: Thursday, February 3, 2011 at 8:52 am EST
Answered on: Tuesday, May 14, 2024 at 1:06 am EDT
Question: I was looking at some one-lines lately and noticed that most large utility transformers have a smaller impedance compared to smaller LV distribution transformers. It appears that most 13.2kV - 480V transformers have an impedance of 2.5% or so while most 480V-240/120V units have an impedance of about 4-5%. Does anyone know the reason for these impeance differences?Also I have read somewhere that a 480V-480V isolation transformer will have a higher impedance than a 480V-120V transformer of the same size. Is there any truth to this?
Reason for Impedance Differences
The impedance difference between large utility transformers and smaller LV distribution transformers is primarily due to the following factors: Voltage level
Higher voltage transformers typically have lower impedance due to thicker insulation and reduced current density in the windings.
Construction
Utility transformers are often core-type transformers, which have a lower impedance compared to shell-type transformers used in distribution applications.
Load
Utility transformers handle larger loads than distribution transformers, requiring lower impedance to minimize voltage drop.
Impedance of Isolation Transformers
Generally, a 480V-480V isolation transformer will have a higher impedance than a 480V-120V transformer of the same size because: Secondary voltage
A step-down transformer (480V-120V) has more turns on the secondary winding, reducing the impedance.*
Insulation: Isolation transformers often require more insulation between windings, increasing the impedance.However, this difference may not always be significant and depends on the specific design of the transformers. Flag for review