Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Panelboard in Dedicated Electrical Closet 110.26-A-1

User: cyriousn, Location: ME / CT

Asked on: Thursday, February 3, 2011 at 11:19 am EST
Answered on: Tuesday, May 14, 2024 at 1:06 am EDT

Question: An architect I'm working with has given me "electrical closets" in the garage for my panelboards. The width of the closets are over 30" but the depth of closets only go 2' and then there are double swining doors to the garage. Are the doors considered to be in the "working space" even though they would be open and out of the way while the panel would be serviced? If they are okay would they to be made of non-combustible materials?

Are the Doors Considered in the "Working Space"?

According to the National Electrical Code (NEC), the "working space" in front of a panelboard is defined as: At least 3 feet wide Clear and accessible with at least 6 feet of headroom Free from obstructionsWhen the double-swinging doors are open and out of the way, they do not obstruct the working space. Therefore, they can be considered to be outside the working space.

Non-Combustible Materials

The NEC does not require the doors to electrical closets to be made of non-combustible materials. However, some local codes may have specific requirements for the materials used in electrical closets. It is always best to check with the local code authority to determine if there are any specific requirements.

Recommendation

To ensure compliance with the NEC and any local codes, it is recommended that:
The double-swinging doors be made to swing completely out of the way when the panelboard is being serviced. The doors be clearly marked as "Electrical Closet" to prevent them from being accidentally closed when the panelboard is being worked on. The architect consult with the local code authority to determine if there are any specific requirements for the materials used in electrical closets in your area. Flag for review

Previous Question Next Question