User: ron, Location: New York, 40.7514,-73.9925
Asked on: Thursday, February 3, 2011 at 12:43 pm EST
Answered on: Tuesday, May 14, 2024 at 1:07 am EDT
Question: I have a 120/208V panelboard with a calculated 23,000A of 3 phase bolted fault current.There is a receptacle installed next to and fed by the panelboard with 5' of #12 copper conductor.The calculated fault current at the receptacle is approx 10kA.Does anyone know what the withstand (short circuit) rating of a 15A receptacle is? Where can I find it?
The withstand (short circuit) rating of a 15A receptacle is typically not specified by the manufacturer. However, it is generally accepted that a 15A receptacle should be able to withstand a short circuit current of at least 5kA. This is based on the assumption that the receptacle will be protected by a circuit breaker or fuse that will trip before the current reaches a dangerous level.You can find more information about the withstand ratings of electrical equipment in the following standards: UL 943: Standard for Safety for Ground-Fault Circuit-Interrupters IEC 60947-2: Low-voltage switchgear and controlgear - Part 2: Circuit-breakersThese standards specify the minimum withstand ratings for electrical equipment based on the type of equipment and the intended application. Flag for review