User: ThomasRay, Location: Portage, Indiana NEC: 2008
Asked on: Thursday, February 3, 2011 at 6:51 pm EST
Answered on: Tuesday, May 14, 2024 at 1:07 am EDT
Question: I was inspecting a master bath whirlpool tub that was energized by a switched receptacle on an 110v ITE GFCI breaker. All was testing normally when I installed my red GB GFCI tester to check polarity and got nothing... no illuminated lights at all. Plugged the pump back in and got full force pump operation. Opened the switch and pump went off. Closed the switch..on. Exercised GFI.. and it opened the circuit. Reset and checked with tester at receptacle...nothing. Put the tick tracer on and yes... it has power, pump works, no illumination from tester. Checked the tester, and it is ok... lit up and tripped all other GFCis. Put the Ideal Sure Test on and nothing. So, how can a receptacle have power and run a pump but still not energize testers? I gave up and instructed my client to have an electrician further evaluate bc a suspect GFCI circuit on a whirlpool tub is not a good thing.
Possible Explanations
Grounding Fault
Although the GFCI breaker is tripping, there could be a ground fault in the wiring or pump that is preventing the testers from detecting a complete circuit.
Loose Neutral Connection
A loose neutral connection can cause a lack of voltage at the receptacle, making it difficult for testers to determine polarity or trip the GFCI.
Damaged Tester Probes
Inspect the probes of the GB GFCI tester and Ideal Sure Test to ensure they are not damaged or bent.
Circuit Wiring Issue
Check the wiring connections at the receptacle and switch for proper polarity and continuity. A miswired circuit can prevent the GFCI from functioning correctly.
Faulty GFCI Receptacle
While the GFCI breaker is tripping, the receptacle itself may be faulty and not providing power to the testers.
Incompatible GFCI Outlet and Tester
Some GFCI outlets require specific testers to detect polarity and trip the circuit. Ensure the tester you are using is compatible with the GFCI outlet.
Back-Fed Circuit
The receptacle may be back-fed from another circuit, bypassing the GFCI protection and preventing testers from detecting a current.
Recommendations
Further Electrical Evaluation
It is recommended to contact an electrician to thoroughly inspect the wiring, connections, and GFCI circuit to identify and resolve any potential issues.*
Safety First: Emphasize the importance of having the circuit properly evaluated by a qualified electrician to ensure the safety of the whirlpool tub and user. Flag for review