Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: contactor location

User: normbac, Location: Henrico County, VA

Asked on: Friday, February 4, 2011 at 9:39 am EST
Answered on: Tuesday, May 14, 2024 at 1:09 am EDT

Question: It is a violation to install a contactor in an electrical panel. Its a 20 x 48 120/208 panel with plenty of room at bottom. If not a violation would this be a bad practice for other reasons? Wiring it to a shunt trip for kitchen.

It is not a violation to install a contactor in an electrical panel, as long as it is installed in accordance with the requirements of the National Electrical Code (NEC). NEC Article 404.14(A) requires that contactors be installed in enclosures that are designed for the purpose. The enclosure must be able to dissipate the heat generated by the contactor and must be of sufficient size to accommodate the contactor and its associated wiring.There are some potential drawbacks to installing a contactor in an electrical panel, however. One is that it can take up valuable space in the panel. Another is that it can generate heat, which can raise the temperature inside the panel. This can be a problem if the panel is located in a hot environment or if there are other sources of heat in the panel.If you are considering installing a contactor in an electrical panel, it is important to weigh the benefits and drawbacks carefully. You should also consult with a qualified electrician to ensure that the installation is done safely and in accordance with code requirements. Flag for review

Previous Question Next Question