Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 6/12 Loadcenter

User: sd4524, Location: Southern California

Asked on: Saturday, February 5, 2011 at 1:49 pm EST
Answered on: Tuesday, May 14, 2024 at 1:11 am EDT

Question: I am updating the wiring in an older home (1939). The existing loadcenter has been updated probably 10 years ago. The 125 amp Loadcenter looks like an 8/16 because it has 8 knockouts for circuit breakers. I take the cover off and... it is one of those stupid 6/12's. The 2 bottom left spaces have the "fingers' chopped off of the bussbar so that no breakers can be attached! The brand is ITE.Does anybody know if I can replace with 8/16 busbar? Code violation?And lastly... why? Why would they make a panel like this? They make the 2 knockouts for the breakers on the cover. why not just make an 8/16?In the other unit of the duplex somebody has rigged breakers into those two spaces. I bet the connection is loose.

Can you replace the busbar with an 8/16?

Yes, in most cases, you can replace the 6/12 busbar with an 8/16 busbar. However, it's important to consult with a qualified electrician to ensure compatibility and compliance with code requirements.

Code violation?

Generally, altering or modifying electrical panels is considered a code violation. Replacing the busbar may require a permit and inspection to ensure it meets code requirements.

Why make a panel like this?

The reason for making a 6/12 panel with two breaker-less spaces is not entirely clear. However, some possible explanations include: Cost savings

It may have been cheaper to manufacture a 6/12 panel with two empty spaces than an 8/16 panel.


Future expansion

The empty spaces could have been intended for future circuit additions without the need to purchase a new panel.*

Error in manufacturing

It's possible that the panel was incorrectly manufactured or designed, resulting in the two unusable spaces.

Loose connections:


If someone has rigged breakers into the two unusable spaces, it's highly likely that the connections are loose. Loose connections can cause overheating, arcing, and potential fire hazards. It's crucial to have a qualified electrician inspect and repair these connections properly. Flag for review

Previous Question Next Question