Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Help with welder circuit

User: mccayry, Location: Tennessee

Asked on: Sunday, February 6, 2011 at 2:20 pm EST
Answered on: Tuesday, May 14, 2024 at 1:13 am EDT

Question: First off I would like to say thanks for all the helpful info that is available on this forum.I have a 40' by 70' workshop that I am preparing an estimate for. The HO wants 2 circuits for future wiring of a welder. The total run would be no more than 100'. I was just curious what size circuit I should run that would be large enough for the specific type welder. Thanks in advance

The size of the circuit you need to run for a welder depends on the type of welder and its specific power requirements. Generally, for a 40' by 70' workshop, you would want to install two 50-amp circuits. This would provide enough power for most types of welders, including stick welders, MIG welders, and TIG welders.Here are the recommended circuit sizes for different types of welders: Stick welders: 50-amp circuit MIG welders: 60-amp circuit* TIG welders: 30-amp circuitIf you are unsure of the specific power requirements of the welder that the homeowner will be using, it is always best to err on the side of caution and install a larger circuit. Flag for review

Previous Question Next Question