Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Title 24 Automatic shut off systems

User: mrdave, Location: Olathe, Kansas

Asked on: Sunday, February 6, 2011 at 5:06 pm EST
Answered on: Tuesday, May 14, 2024 at 1:13 am EDT

Question: Does anyone have idea on least expensive way to have automatic shut off forcommercial (restaurant) lighting per 2008 title 24 part 6 section 131(d)I've got 8 switches to control with some being dimmersThey call for 365 day timer "time clock" ($1800 for 8 pole)with manual bypass (2-hour timers $20 each)If the timers aren't in same area as lights, you need annunciator more $$I know some people use 1 pole time clock and relays to save $$I was thinking of Maestro RF dimmers with RF occupancy sensors.Then you don't need bypass timer or time clock.Could be issues with occ. sensors in restaurant though?Any one else done this or have any ideas?

Cost-Effective Automatic Light Shut-Off Options1. Single-Pole Time Clock and Relays

Use a single-pole time clock to control a relay for each switch. Relays can be installed behind switches or in a central location. Estimated cost: $500-$1000 for an 8-pole system.

2. Maestro RF Dimmers with RF Occupancy Sensors

Maestro RF dimmers with RF occupancy sensors eliminate the need for bypass timers and time clocks. Sensors detect motion and automatically turn off lights when unoccupied. May not be suitable for all restaurant areas due to potential interference from kitchen equipment or staff movement. Estimated cost: $1200-$1500 for an 8-switch system.

3. Manual Occupancy Sensors

Install motion-activated occupancy sensors in each area. Lights are turned off manually using a button or switch. Requires staff cooperation and may not be ideal for high-traffic areas. Estimated cost: $500-$800 for an 8-sensor system.

4. Wireless Lighting Control System

Use a wireless lighting control system with occupancy sensors and time-based schedules. Sensors can be programmed to detect movement and automatically adjust lighting levels or turn off lights during unoccupied hours. Estimated cost: $1500-$2500 for an 8-zone system.

Additional Considerations



Occupancy sensor placement

Sensors should be placed in areas that are likely to be unoccupied when lights are not needed.


Bypass switches

Consider installing bypass switches in areas where lights may need to be manually turned on, such as restrooms.*

Annunciators

If timers are installed in a different area from the lights, annunciators can provide visual or audible alerts when lights are being turned off.

Recommendation:


Based on cost and effectiveness, the single-pole time clock and relay option is a cost-effective solution for commercial lighting automatic shut-off. However, the Maestro RF dimmers with RF occupancy sensors or a wireless lighting control system may be more appropriate options if occupancy sensing is a priority or if manual bypass is not desired. Flag for review

Previous Question Next Question